This is simple, but did you check all your permission settings?
Hi, I've checked the archives and haven't been able to see my problem addressed. If this is a redundant post, please forgive me and point me towards the relevant post.
When I boot from the Knoppix cd I am able to read from my FAT32 partitions, but not write to or delete.
After I did a hard drive install, Debian now boots but I am unable to read these partitions. fstab does indicate that these partitions exist, but I'm not able to mount these partitions. I have tried a few different commands to no avail.
I'm under a bit of a time constraint as I'm going on tour in three weeks and would like to get a bunch of the data on the fat32 partitions onto discs. I have tried reinstalling windows and have run into huge problems there.
Any help that could be provided would be great, and responses off-list are okay.
ultimates[at]thewailingultimates.com
This is simple, but did you check all your permission settings?
this may be naive but i assumed that if i was logged in as root i'd have full administrative permissions.
as i type this i'm running the knoppix live cd again. i've changed the writable status of all partitions which solves the deletion problem (funny how patient observation can come in handy). once i move them off this computer to my ftp i'm going to change all partitions to ext2 and start from scratch. thanks for your quick reply, sorry if this was a waste
As root, go to /etc/fstab
open it up in an editor and remove any lines begining with a # except the one which starts
# partitions found by Knoppix
you can then reboot and do (as root)
mount -t vfat /dev/hd? /mnt
(take the cue from /etc/fstab as to what the hd? should actually be)
cd to /mnt
do an ls
and you should see all your Windows stuff. (If you want to do it graphically, try Kmenu > Systems > More Programs > File Manager Super User Mode).
This assumes a HD install.
or maybe cd to /mnt and add the mountpoints...at least i have to.
* * * * * *Thanks, fingers99, I had the identical problem and that fixed it right up. I am still having a problem, though. I don't know how to keep those FAT32 Partitions mounted the next time I boot up, or, barring that, get Linux to re-mount them automatically on startup. Any ideas (anyone) You can tell, I'm really new to Linux.Originally Posted by fingers99
Post your /etc/fstab file
~rock
* * * *After digging for a while online, I changed my fstab to this:
* * * *It seems to work, but when I log in as somebody other than root, the drive will appear mounted on my Desktop, but the partition will be empty when I click it.*Code:/dev/hda3 / ext2 defaults,errors=remount-ro 0 1 /dev/hdb6 none swap sw 0 0 /dev/hda6 /mnt/Documents vfat defaults 0 0 /dev/hdb7 /mnt/Multimedia vfat defaults 0 0 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,user,noexec,noauto 0 0 # partitions found by Knoppix
IBM Power8 S822L Storage Server 8247-22L - With Ram, Some Cards, No HDD's
$399.95
IBM SYSTEM X3500 M3 SERVER 7380AC1 2*XEON E5620 2.4GHz 8GB SEE NOTES
$33.21
IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM
$795.00
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$479.96
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU
$129.99
IBM X3650 M5 5462-AC1,2 X E5-2640V3 2.6GHZ 8C, 16 GB, DUAL 750W, 2 X 1TB SERVER
$249.99
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$359.99
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$119.99