-
Junior Member
registered user
Possible 9-24 ISO size problem
Hey there, I am having trouble with the 9-24EN ISO in that I have tried burning it to 2 different CD-RW discs with no success. Some background:
-I use Linux and cdrecord to burn
-I have burned many Knoppix ISOs before
-I have been able to burn Knoppix to a CD-RW once before
When I do cdrecord it doesnt report any errors. The disc will actually boot, but will die when I try to use the network config tool. I tried to do an md5sum to both copies and after a long time got Input/Output errors, whereas a good CD returns the MD5.
My theory is that since previous releases were slightly smaller, perhaps this 700MB ISO is causing trouble. Is anyone else having trouble and if so, should we talk to Mr. Knopper about going back to 695MB ISOs?
-
Senior Member
registered user
No problems burning the 9-24 release w/ cdrecord here. I've heard lots of problems related to burning 9-24 but w/ those lamo winapps not cdrecord. You are using cdrecord in Linux right? If your md5sums don't come back then that seems a little odd to me.
-
I have had the same problem burning this release with Linux. Two out of five 700MB CDRW disks tried have failed. I also assumed that it was a size related issue. I have checked the md5sums on the files and have never had a problem in the past.
dash
-
Senior Member
registered user
Originally Posted by
dash
I have had the same problem burning this release with Linux. Two out of five 700MB CDRW disks tried have failed. I also assumed that it was a size related issue. I have checked the md5sums on the files and have never had a problem in the past.
dash
It burns fine on my cdrw's do you blank=all before you record the new ISO to the disk?
-
Junior Member
registered user
Originally Posted by
Stephen
It burns fine on my cdrw's do you blank=all before you record the new ISO to the disk?
I blanked mine with blank=disc and I'm using quality media.
It's possible people are having this problem but don't realize it since it burns without an error and will boot. It wasn't until trying to run network config that it became evident that there was a problem with the disc. I see other people on the forum who are having misc. problems running specific apps, could these be related?
Similar Threads
-
By bwathen in forum Laptops
Replies: 3
Last Post: 04-29-2005, 12:53 PM
-
By harken in forum Hardware & Booting
Replies: 2
Last Post: 02-26-2005, 03:23 AM
-
By jesselong in forum Customising & Remastering
Replies: 5
Last Post: 05-26-2004, 01:24 PM
-
By AP in forum Customising & Remastering
Replies: 0
Last Post: 04-11-2004, 03:36 AM
-
By hnt in forum General Support
Replies: 4
Last Post: 08-19-2003, 09:36 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU
$299.00
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$179.99
Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED
$349.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M620 Blade Server/8x8 GB Ram (64GB)/2x Intel Xeon E5-2680 2.70GH
$50.00
Dell PowerEdge M630 / HHB Server Module w 2x Intel E5-2680 & Dell P3V42 No HDD
$89.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M1000e Chassis w/ 16 x M600 Blade Servers(No Ram, 2 x 147GB HD)
$300.00
DELL PowerEdge M630 Blade 2x E5-2697v4 2.3GHz =36 Cores 128GB H330 2x10Gb X520
$303.00