Results 1 to 9 of 9

Thread: lilo vs. gag

  1. #1
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256

    lilo vs. gag

    I'm curious to hear from people with experience using both lilo in the mbr and gag. How is using gag different, or does gag just install itself in the mbr too? If so, is using gag safer somehow or easier?

    TIA,

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Posts
    202
    to use gag with linux lilo must be installed in root partition, no in mbr.
    gag may be installed in mbr or it may be run from diskette.
    If lilo is installed in mbr, as usual, GAG dont "see" it.


    http://gag.sourceforge.net/index.html

  3. #3
    Senior Member registered user
    Join Date
    Feb 2003
    Posts
    202
    GAG is not a replacement for lilo or grub. It is a "switcher"
    This cut&paste may help to understand

    I better recommend you to use the GAG boot loader http://gag.sourceforge.net/ ,a short description of the process would be:

    1.- Use a tool to make the partitions for each OS (Partition Magic $, DiscDrake (from a knoppix for example), etc). Linux can be in the 2 HD.

    2.- Then install in a good order de Os's, setting the appropiate partition ACTIVE and installing there, then change the active partition for the next and intall there the other windows. Then install linuxes. But take care of this, INSTALL THE APPROPIATE BOOT LOADERS (NT LOADER, LILO, ETC) IN ITS PARTITION, NO THE MBR. Gag will be installed in MBR.

    3.- Install GAG, then you have a "higher" level boot loader that you can use to switch any os by preserving their respective boot loaders (NT loader, lilo, etc). Gag is installed from a diskette, and you save your configuration in the diskette.

  4. #4
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    OK, so gag just switches boot loaders, say XP on hda1 and linux on hda2 with lilo in root. But is gag in mbr safe? I've had very bad experiences with lilo in mbr....

    TIA,

  5. #5
    Member registered user
    Join Date
    Sep 2003
    Posts
    67
    So instead of having options in the boot loader in the MBR you have seperate boot loaders in the beginning of each partitions and then you use gag to select which partition to boot..

    I think this is what gag is, from reading this post.

  6. #6
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    Right, but I thought that messing with the mbr is not a good idea. Doesn't gag get installed in the mbr just like lilo does?

    TIA,

  7. #7
    Member registered user
    Join Date
    Sep 2003
    Posts
    67
    Sounds like it does. Messing with the MBR can be a very bad idea, but that does not mean that you cant/shouldnt do it. If you do what you are supposed to then everything will be fine. ALWAYS MAKE BOOT DISKS and then you can never really get into trouble.

  8. #8
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    I just did! I don't see the benefit of using gag over lilo in the mbr, do you?

    Regards,

  9. #9
    Member registered user
    Join Date
    Sep 2003
    Posts
    67
    No, I agree. I do not see any advantages.

Similar Threads

  1. where has LILO gone
    By whoeverheis in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 03-25-2005, 07:13 PM
  2. Reinstall lilo to hda, using hda lilo.conf and knoppix live
    By tomjermy in forum Hardware & Booting
    Replies: 1
    Last Post: 03-17-2005, 01:07 AM
  3. LILO
    By emartinson in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 06-21-2004, 04:22 AM
  4. Fix LILO?
    By JockVSJock in forum General Support
    Replies: 7
    Last Post: 04-09-2004, 10:42 AM
  5. lilo help
    By sminotti in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 08-04-2003, 03:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco WS-C3560-48PS-S 48-Port Managed Gigabit PoE Switch picture

Cisco WS-C3560-48PS-S 48-Port Managed Gigabit PoE Switch

$56.00



Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP

$249.99



Cisco WS-C2950T-24, 24-Port Ethernet Switch picture

Cisco WS-C2950T-24, 24-Port Ethernet Switch

$49.99



HP 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A picture

HP 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A

$30.95



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$21.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$18.99



HP ProCurve 2530-24G J9776A 24 Port Gigabit Ethernet Managed Network Switch picture

HP ProCurve 2530-24G J9776A 24 Port Gigabit Ethernet Managed Network Switch

$34.99



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord

$43.95



Netgear Prosafe Plus JGS524PE 24 Port Gigabit Switch 12 Port PoE JGS524PE-100NAS picture

Netgear Prosafe Plus JGS524PE 24 Port Gigabit Switch 12 Port PoE JGS524PE-100NAS

$129.98