Open up a console window. At the prompt, type:
sudo passwd root
Enter password twice. Now root has a password.
-SUO
Here's How To Set Root Password On Knoppix-Live-CD:
1) Open The Shell - Konsole (There Should Be An Icon On Your Task Bar)
2) You Will Get A Prompt That Says: knoppix@ttyp0[knoppix]$
When You Get This Prompt Type: knoppix@ttyp0[knoppix]$ su Root
This Changes You To Root From Within The Console
3) Then Your Prompt Should Look Something Like: root@ttyp0[root]$
Just something like that. It might be a little different.
When You Do Then It Notices You As Root But You Still Don't Have
The Root Access.
4) After that type: root@ttyp0[root]$ KUser
This will open up the KUser Manager Window.
5) After its opened highlight the Root section.
6) Above the list of logins you should see something like Add Edit Del...
Click On The Edit Icon.
7) At the top right corner you should see: Set Password..
Click On That And Type In The Password - Verify It and that will be
the new root password for the Knoppix-Live-CD.
I was just messing around with Knoppix and found this out...I've had a lot of
people ask me how to do it and I've just found out how and I couldn't find
anything online on how to do it...so hopefully then will help some of you guys
out Have Fun.
Riley
Open up a console window. At the prompt, type:
sudo passwd root
Enter password twice. Now root has a password.
-SUO
ahhh, now i see there was no place set where to store the passwd and shadow file.
SUOrangeman, MrWizard,
I tried both methods to get password working on remastered Knoppix 3.3
with no success. Password for root is accepted, but after reboot I cannot login. This is not big deal since there is another problem: login times out with msg: Login timed out after 60 seconds.
( and I have root access with no password - and I keep it this way till I find howto get my password working)
There are lines in inittab like this:
1:12345:respawn:/bin/bash -login >/dev/tty1 2>&1 </dev/tty1
which probably allow me access without password, but I need password.
( inittab on my redhat partition has no '-login' in it ??
Any suggestions ?
wiesiek
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD
$1000.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v3 2.6GHz =20 Cores 64GB P246 650FLB
$196.00