-
Kernel compile problem - first Knoppix kernel compile
I attempted to compile kernel 2.4.22 using the standard Debian kernel compile method. It appears that on the bootup the kernel is still picking up the modules from 2.4.20-xfs. Do I need to change one of my init scripts or am I foretting something? I have done several kernel compiles in Debian so I'm pretty experienced doing them. Do I need to do something different because it's Knoppix?
Thanks in advance.
-
Senior Member
registered user
Re: Kernel compile problem - first Knoppix kernel compile
Originally Posted by
Nigel_Tufnel
I attempted to compile kernel 2.4.22 using the standard Debian kernel compile method. It appears that on the bootup the kernel is still picking up the modules from 2.4.20-xfs. Do I need to change one of my init scripts or am I foretting something? I have done several kernel compiles in Debian so I'm pretty experienced doing them. Do I need to do something different because it's Knoppix?
Thanks in advance.
By standard Debian method do you mean make-kpkg to make a kernel package? If so it should just work when you install the .deb and reboot. The only thing I could think of it would be doing is if you built with initrd and it is still using the old knoppix one.
-
I think I know what the problem is. After reading through the tips and tricks forum I found the thread started by rickenbacherus:
http://www.knoppix.net/forum/viewtopic.php?t=3029
The step I didn't do:
make-kpkg --initrd --revision=custom.1.0 kernel_image modules
*NOTE* adding the modules target to the above line is critical or your new kernel will fail to boot because the existing modules were compiled for 2.4.20xfs instead of 2.4.21 Also it eliminates making another kpkg and installing another kpkg.
You normally don't have to do this for Debian. I'll recompile and let you know how it goes.
Thanks
Similar Threads
-
By cfish in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 04-25-2005, 07:31 AM
-
By FelixDzerzhinsky in forum General Support
Replies: 12
Last Post: 08-26-2004, 04:04 AM
-
By coindood in forum Hdd Install / Debian / Apt
Replies: 6
Last Post: 05-05-2004, 08:17 AM
-
By Worm in forum General Support
Replies: 0
Last Post: 02-01-2004, 07:42 PM
-
By thincritter in forum General Support
Replies: 4
Last Post: 07-01-2003, 03:10 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99