You can try booting with the expert cheat code and enter the specs for your video card and display manually. Also you can boot knoppix 2 and although you won't have Xwindows you could at least see if the cd will boot on your machine.
I get the "you passed an undefined mode number" error. I've tried fb800x600, knoppix nosmp vga=normal screen=800x600 xvrefresh=60 and I've tried knoppix-txt, and while those get past the error, after "uncompressing kernel..." my screen goes blank, and the cdrom keeps being hit.
My machine is a Micron Millennia Transport laptop.
edit: video is a Cirrus Logic GD7548
You can try booting with the expert cheat code and enter the specs for your video card and display manually. Also you can boot knoppix 2 and although you won't have Xwindows you could at least see if the cd will boot on your machine.
at startup:
knoppix xmodule=fbdev
Tried this, same error. I briefly see some multicolored text, and then the screen goes blank.Originally Posted by jtevermore
OK, when I use the "expert" code, it still says undefined mode number, but I skip it and get to this:
Video is GD754x (laptop) GD 7548, using XF86_SVGA(vesa) Server
Monitor is Generic Monitor, H:28.0-96.0kHz, V:50.0-62.0Hz
Using Modes "1024x768" "800x600" "640x480"
after I say yes to run XF86 config, I set it to supervga 800x600 for the monitor, the lowest refresh rates, choose my GD7548 for the card, choose vesa, and then I get strange lines and blurry shapes on screen.
same thing happens if I choose "no" to reconfiguring X11.
any more ideas?
I could not get a working X configuration for my laptop in 3.3, so I went back to Knoppix 3.2, since it works just fine.
I had the same problem with 3.2 before this
and seeing the same problems with 3.3....fuzzy and illegible display. Tried almost every cheat code I could find.
edraven, did you ever come to a solution?
I think you might be on the right track just wrong screen resolution.
try
try changing the resolution to a lower if necessary. This is what worked on my laptop.Code:knoppix xmodule=fbdev fb=1024x768
johnb
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$394.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Dell PowerEdge T430 Server w/ Intel Xeon E5-2650 V4 & 1100W PSU (2X) - NO RAM
$314.99
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$39.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$454.99
Cisco UCS C220 M4 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB RAID-M4 4xRJ45
$244.00