I installed an M.2 nvme drive in a Lenovo m710s and wanted to install knoppix 9.1 to it but am having some issues.
The flash installer doesn't see it as a hard drive or a flash drive.
It does get seen by knoppix as /dev/nvme0n1, so running flash knoppix manually with "flash-knoppix /dev/nvme0n1" it errors after trying to do the dos format with the message
"mkdosfs: unable to open /dev/nvme0n11: No such file or directory"
The system refers to the first nvme partition as /dev/nvme0n1p1.
Somehow I think that if it doesn't see it on /dev/sda* that it's not going to work properly.
Guess I'll have to wait for the next version to use one of these new fangled M2 drives.
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99