I installed an M.2 nvme drive in a Lenovo m710s and wanted to install knoppix 9.1 to it but am having some issues.
The flash installer doesn't see it as a hard drive or a flash drive.
It does get seen by knoppix as /dev/nvme0n1, so running flash knoppix manually with "flash-knoppix /dev/nvme0n1" it errors after trying to do the dos format with the message
"mkdosfs: unable to open /dev/nvme0n11: No such file or directory"
The system refers to the first nvme partition as /dev/nvme0n1p1.
Somehow I think that if it doesn't see it on /dev/sda* that it's not going to work properly.
Guess I'll have to wait for the next version to use one of these new fangled M2 drives.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$23.98
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.16
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$44.55