I installed an M.2 nvme drive in a Lenovo m710s and wanted to install knoppix 9.1 to it but am having some issues.
The flash installer doesn't see it as a hard drive or a flash drive.
It does get seen by knoppix as /dev/nvme0n1, so running flash knoppix manually with "flash-knoppix /dev/nvme0n1" it errors after trying to do the dos format with the message
"mkdosfs: unable to open /dev/nvme0n11: No such file or directory"
The system refers to the first nvme partition as /dev/nvme0n1p1.
Somehow I think that if it doesn't see it on /dev/sda* that it's not going to work properly.
Guess I'll have to wait for the next version to use one of these new fangled M2 drives.
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$42.49
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99