I'm so used to hitting CTRL+ALT+t to start up a terminal, here's how to do it in knoppix 9.1.
Go to Preferences/CompizConfig Settings Manager then click on General / Commands, set command line 1 to "terminator" (don't type the quotes) then go to Key Bindings and set "Run command 1" to Control Alt t by clicking on the "disable button" (because it's disabled by default) and then click on "grab key combination" and type Control Alt t and then click on OK.
Now Control Alt t should load terminator.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
881507-001 HPE 2.4TB SAS 12G 10K SC 512E DS G8-G10 Hard Drive 881457-B21 F/S
$274.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.15
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST HDD HUH721010AL5200 10TB 3.5" SAS 12Gb/s Server Hard Disk Drive *READ
$50.89
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$169.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99