Results 1 to 1 of 1

Thread: Using knoppix 9.1 with cvt/xrandr to test monitors

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    93

    Using knoppix 9.1 with cvt/xrandr to test monitors

    I like to try to find monitors that will support 15khz signals (like for the Amiga). So I try a bunch of different resolutions with cvt but it's really a pain to do it manually.

    So I resolved to find a better way to do it.

    I use a small ASUS laptop, an EEE pc 900A with Intel 945GM graphics that has a 4gb ssd with a "minimal version" 700Mb knoppix installed to the ssd, as the full 4.7gb knoppix won't fit on the ssd.

    This can also be worked around because the EEEpc can also boot from an SD card or a USB flash drive that is larger than 4.7gb by hitting ESC during the boot sequence.


    I wrote a small script that I call mycvt that uses cvt and xrandr to set the output resolution modeline.


    The asus eee pc has a VGA output called VGA1 by xrandr. If I don't specify a device to use, then it will default to using VGA1.

    You can set the device by running mycvt using source and a single parameter.

    "source ./mycvt HDMI-1; ./mycvt 1280 960" will set the xrandr device to HDMI-1 and then attempt to change the resolution to 1280 by 960

    A single dot is also an alias for source, you can do

    ". ./mycvt HDMI-1; ./mycvt 1280 960"

    You can also set the device by just using the environment variable d and export:

    "export d=HDMI-1; ./mycvt 1920 1080 -r"
    "export d=LVDS1; ./mycvt 1024 600"


    The bash script for mycvt, you will need to "chmod u+x" to make it executable.

    Code:
    #/bin/bash
    if [ $# -eq 1 ]
    then
    echo one parameter given, set device to $1
    declare -x d=$1
    printenv d
    #no, child cannot modify env vars of parent but you can run it as source ./mycvt and it will work
    #. ./mycvt VGA1 will also work as . is an alias for source
    else
    echo $*
    cvt $*
    echo d = $d
    if [ -z "$d" ]
    then
      d=VGA1
      echo no device specified, using $d
    fi
    a=`cvt $* | tail -1 | cut -d' ' -f2-`
    b=`cvt $* | tail -1 | cut -d' ' -f2`
    echo $a 
    echo $b
    echo xrandr --newmode $a
    echo xrandr --addmode $d $b
    echo xrandr --output $d --mode $b
    xrandr --newmode $a
    xrandr --addmode $d $b
    xrandr --output $d --mode $b
    fi

    So if you use a resolution that makes it invisible, there's lots of ways to recover:

    One way is to kill the x server with CTRL+ALT+Backspace, and it will relaunch X and use a ddc detected resolution.
    If you make it so that the terminal is launched with .config/autostart desktop entry, it's really convenient.

    If something goes awry, just kill the X server and you're back almost instantly.


    Another is to specify a normal resolution by blind typing "./mycvt 800 600" or "./mycvt 1024 768"


    Another method is to switch to a VT with CTRL+ALT+f4 to select VT4, then type
    "chvt 6; sleep 4; export DISPLAY=:0; sudo -u knoppix xrandr --output VGA1 --mode 1024x768"
    to set the VGA1 mode to 1024x768.


    Another is to have a couple of failsafe scripts like 800 or 1368 (using chmod u+x to make them executable)

    800:
    ./mycvt 800 600

    1368:
    ./mycvt 1368 768

    1920:
    ./mycvt 1920 1080 -r




    I like the ability of the asus 900A to have it's own screen active, so if I can't see what I'm typing, I'll type CTRL+L to clear the terminal so that I'm typing up at the top of the screen.


    So I can test a monitor if it can handle 15khz signals pretty quickly with a few scripts, I call 240 and 292:

    240:
    ./mycvt 720 240 60

    292:
    ./mycvt 720 292 50

    and then recover easily with ./800 if the signal is unsupported.

    There's basically a whole range of resolutions and refresh rates that you can try, it's really easy to experiment.

    For example, some video cards don't like to output any horizontal resolution lower than a certain value, so you can try different values:

    ./mycvt 720 240 60
    ./mycvt 960 240 60
    ./mycvt 1280 240 60
    ./mycvt 1440 240 60
    ./mycvt 1920 240 60
    Last edited by don999; 03-18-2023 at 06:10 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Apple MacBook Pro 13” Dual Core i5 16GB RAM | 1TB HD | OS Catalina | WARRANTY picture

Apple MacBook Pro 13” Dual Core i5 16GB RAM | 1TB HD | OS Catalina | WARRANTY

$229.00



WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F picture

WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F

$25.00



Apple Macbook Pro 13

Apple Macbook Pro 13" Laptop | UPGRADED i5 16GB RAM | 1TB HD | MacOS | WARRANTY

$255.55



Lot of 4 - Dell 1TB 7.2k 6G SATA 3.5in HDD HUS722T1TALA600 - 0HNWHH picture

Lot of 4 - Dell 1TB 7.2k 6G SATA 3.5in HDD HUS722T1TALA600 - 0HNWHH

$79.99



Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot picture

Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot

$23.99



Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5

Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot

$14.99



Crucial - P3 Plus 1TB Internal SSD PCIe Gen 4 x4 NVMe picture

Crucial - P3 Plus 1TB Internal SSD PCIe Gen 4 x4 NVMe

$69.99



1TB HDD/SSD 2.5

1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed

$29.95



1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage US picture

1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage US

$26.29



Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot picture

Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot

$198.99