Results 1 to 1 of 1

Thread: Using knoppix 9.1 with cvt/xrandr to test monitors

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    94

    Using knoppix 9.1 with cvt/xrandr to test monitors

    I like to try to find monitors that will support 15khz signals (like for the Amiga). So I try a bunch of different resolutions with cvt but it's really a pain to do it manually.

    So I resolved to find a better way to do it.

    I use a small ASUS laptop, an EEE pc 900A with Intel 945GM graphics that has a 4gb ssd with a "minimal version" 700Mb knoppix installed to the ssd, as the full 4.7gb knoppix won't fit on the ssd.

    This can also be worked around because the EEEpc can also boot from an SD card or a USB flash drive that is larger than 4.7gb by hitting ESC during the boot sequence.


    I wrote a small script that I call mycvt that uses cvt and xrandr to set the output resolution modeline.


    The asus eee pc has a VGA output called VGA1 by xrandr. If I don't specify a device to use, then it will default to using VGA1.

    You can set the device by running mycvt using source and a single parameter.

    "source ./mycvt HDMI-1; ./mycvt 1280 960" will set the xrandr device to HDMI-1 and then attempt to change the resolution to 1280 by 960

    A single dot is also an alias for source, you can do

    ". ./mycvt HDMI-1; ./mycvt 1280 960"

    You can also set the device by just using the environment variable d and export:

    "export d=HDMI-1; ./mycvt 1920 1080 -r"
    "export d=LVDS1; ./mycvt 1024 600"


    The bash script for mycvt, you will need to "chmod u+x" to make it executable.

    Code:
    #/bin/bash
    if [ $# -eq 1 ]
    then
    echo one parameter given, set device to $1
    declare -x d=$1
    printenv d
    #no, child cannot modify env vars of parent but you can run it as source ./mycvt and it will work
    #. ./mycvt VGA1 will also work as . is an alias for source
    else
    echo $*
    cvt $*
    echo d = $d
    if [ -z "$d" ]
    then
      d=VGA1
      echo no device specified, using $d
    fi
    a=`cvt $* | tail -1 | cut -d' ' -f2-`
    b=`cvt $* | tail -1 | cut -d' ' -f2`
    echo $a 
    echo $b
    echo xrandr --newmode $a
    echo xrandr --addmode $d $b
    echo xrandr --output $d --mode $b
    xrandr --newmode $a
    xrandr --addmode $d $b
    xrandr --output $d --mode $b
    fi

    So if you use a resolution that makes it invisible, there's lots of ways to recover:

    One way is to kill the x server with CTRL+ALT+Backspace, and it will relaunch X and use a ddc detected resolution.
    If you make it so that the terminal is launched with .config/autostart desktop entry, it's really convenient.

    If something goes awry, just kill the X server and you're back almost instantly.


    Another is to specify a normal resolution by blind typing "./mycvt 800 600" or "./mycvt 1024 768"


    Another method is to switch to a VT with CTRL+ALT+f4 to select VT4, then type
    "chvt 6; sleep 4; export DISPLAY=:0; sudo -u knoppix xrandr --output VGA1 --mode 1024x768"
    to set the VGA1 mode to 1024x768.


    Another is to have a couple of failsafe scripts like 800 or 1368 (using chmod u+x to make them executable)

    800:
    ./mycvt 800 600

    1368:
    ./mycvt 1368 768

    1920:
    ./mycvt 1920 1080 -r




    I like the ability of the asus 900A to have it's own screen active, so if I can't see what I'm typing, I'll type CTRL+L to clear the terminal so that I'm typing up at the top of the screen.


    So I can test a monitor if it can handle 15khz signals pretty quickly with a few scripts, I call 240 and 292:

    240:
    ./mycvt 720 240 60

    292:
    ./mycvt 720 292 50

    and then recover easily with ./800 if the signal is unsupported.

    There's basically a whole range of resolutions and refresh rates that you can try, it's really easy to experiment.

    For example, some video cards don't like to output any horizontal resolution lower than a certain value, so you can try different values:

    ./mycvt 720 240 60
    ./mycvt 960 240 60
    ./mycvt 1280 240 60
    ./mycvt 1440 240 60
    ./mycvt 1920 240 60
    Last edited by don999; 03-18-2023 at 06:10 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Vintage DEC Digital Computer Monitor Display Riser Acrylic Smoked Plexiglass picture

Vintage DEC Digital Computer Monitor Display Riser Acrylic Smoked Plexiglass

$99.99



VINTAGE DEC/MDB Systems MLSI-TEV Circuit Board #40040340 1976 (B5) picture

VINTAGE DEC/MDB Systems MLSI-TEV Circuit Board #40040340 1976 (B5)

$69.99



Vintage Digital DEC 54-15688 rainbow color graphics option picture

Vintage Digital DEC 54-15688 rainbow color graphics option

$129.99



Vintage DEC/CLEARPOINT INC. -QRAM-2 SAB-1 1MB Q-BUS MEMORY MSV11-QA (B2) picture

Vintage DEC/CLEARPOINT INC. -QRAM-2 SAB-1 1MB Q-BUS MEMORY MSV11-QA (B2)

$129.99



WORKING:  Vintage 2GB DEC External SCSI Hard Drive for Apple Macintosh, etc. picture

WORKING: Vintage 2GB DEC External SCSI Hard Drive for Apple Macintosh, etc.

$49.99



Vintage DIGITAL DEC MICROVAX II Model: DH-630Q3-E2 W/ Boards picture

Vintage DIGITAL DEC MICROVAX II Model: DH-630Q3-E2 W/ Boards

$1800.00



Digital Equipment Corp HSC50-AA Vintage DEC Mass Storage Controller plus Manual picture

Digital Equipment Corp HSC50-AA Vintage DEC Mass Storage Controller plus Manual

$1557.60



Vintage DEC VT420 Amber Screen Monochrome Text Terminal Computer Tested #2 picture

Vintage DEC VT420 Amber Screen Monochrome Text Terminal Computer Tested #2

$159.99



Vintage DEC DSP3105 1GB SCSI hard drive tested see description 1056 picture

Vintage DEC DSP3105 1GB SCSI hard drive tested see description 1056

$30.00



Vintage DEC Digital M8153 RH70 UNIBUS CONTROL-BCT (B15) picture

Vintage DEC Digital M8153 RH70 UNIBUS CONTROL-BCT (B15)

$139.99