I have a 140G ext3 partition with just 12G used. The command
$ partimage -z0 -d -V -f0 -b save /dev/sdb1 /d/img/pim.1.28-MAR
should work trivially. But instead of a watchable accumulating 12G saved image
I am getting a no-event screen with a saved image of size 19189 bytes after
about 2 minutes.
partimage works just fine with fat, fat32, ext2, even ntfs partitions.
I know it doesn't work with exfat systems.
Its Help explicitly states ext3 as a manageable source.
Has anybody else had trouble with ext3 and worked around it?
Do I need to alter my switches?
Thank you!
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99