I have a 140G ext3 partition with just 12G used. The command
$ partimage -z0 -d -V -f0 -b save /dev/sdb1 /d/img/pim.1.28-MAR
should work trivially. But instead of a watchable accumulating 12G saved image
I am getting a no-event screen with a saved image of size 19189 bytes after
about 2 minutes.
partimage works just fine with fat, fat32, ext2, even ntfs partitions.
I know it doesn't work with exfat systems.
Its Help explicitly states ext3 as a manageable source.
Has anybody else had trouble with ext3 and worked around it?
Do I need to alter my switches?
Thank you!
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.34
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00