Results 1 to 2 of 2

Thread: Invitation to create sda3 for KNOPPIX-DATA has disappeared - why?

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    Invitation to create sda3 for KNOPPIX-DATA has disappeared - why?

    I have been using KNOPPIX 8.6.1 since announcement, installed to tiny bootable sticks and also to large capacity bootable mobile drives.
    In the past, at first use, I have always got a nag to create an additional partition sda3 (reiserfs) to host /KNOPPIX-DATA/ which has provided a limited but useful personalised platform.
    I recently installed the same thing 8.6.1 from the identcal original iso to a new stick and also to a different mobile drive.
    I have altered nothing!
    But there is no nag to create sda3; and even if I create it and format it, no oppotunity to use it as described (KNOPPIX-DATA) is either offered or enacted.
    I've not obviously changed anything whatsoever (other than the physical devices).
    Can anybody explain the inexplicable??
    Thank you.
    PS Almost no activity on this forum during 2022, 2023. Has the user base shrunk? Or is everybody but me too expert to need recourse to a forum??

  2. #2
    Member registered user
    Join Date
    Apr 2007
    Posts
    94
    Quote Originally Posted by fergus View Post
    I have been using KNOPPIX 8.6.1 since announcement, installed to tiny bootable sticks and also to large capacity bootable mobile drives.
    In the past, at first use, I have always got a nag to create an additional partition sda3 (reiserfs) to host /KNOPPIX-DATA/ which has provided a limited but useful personalised platform.
    I recently installed the same thing 8.6.1 from the identcal original iso to a new stick and also to a different mobile drive.
    I have altered nothing!
    But there is no nag to create sda3; and even if I create it and format it, no oppotunity to use it as described (KNOPPIX-DATA) is either offered or enacted.
    I've not obviously changed anything whatsoever (other than the physical devices).
    Can anybody explain the inexplicable??
    Thank you.
    PS Almost no activity on this forum during 2022, 2023. Has the user base shrunk? Or is everybody but me too expert to need recourse to a forum??

    I can't explain the strange behavior. Perhaps it behaves a little differently if you're installing to a hard disk versus a removable usb drive.
    Is your system booting as UEFI or legacy?


    However, you might download knoppix 9.1 which has been out for awhile (2 years now) and run with an updated system.

    I've almost always gone with using an overlay file instead of overlay partition. Of course it's limited to 4GB because of FAT32. You can mount other partitions with the file manager after booting if you need a large place for data.

    The only annoying thing is that the overlay files tend to get corrupted from time to time and need to get rebooted with "noimage" cheat code to run fsck.ext2 /mnt-system/KNOPPIX/knoppix-data.img


    You could create any partition manually that you need with gparted if you absolutely need an overlay partition. I remember awhile ago trying to make it manually, are you sure you did reiserfs? (can't remember as it's been awhile since I used 8.6) It should just use it if it's there.

    Interestingly, I installed KNOPPIX 9.1 to the hard drive with an overlay file and it removed the knoppix-data.inf file from /mnt-system/KNOPPIX.
    That file contained a single line: "3 /KNOPPIX-DATA reiserfs" which I believe means look for the 3rd partition and mount it at /KNOPPIX-DATA and use reiserfs.

    Now if I boot knoppix from the dvd-rom, it is so good at auto-finding my knoppix on the hard drive that I had to make a new partition as ext4 and dd if=/dev/sr0 of=/media/sda2/k91.iso bs=1M to copy the dvd to the hard drive and boot with "knoppix64 bootfrom=k91.iso" to see that knoppix-data.inf file (it auto searches each parition for the file).

    Note also that you don't actually have to reformat your hard drive and repartition, you can boot from the dvd-rom and use knoppix tohd=/dev/sda1 to copy the knoppix files to the hard drive partition and it will do most everything that a hard drive installation will do except for the "boot sector" booting. So you just have to use a dvd-rom to boot and knoppix will autofind it generally or you can use knoppix fromhd=/dev/sda1 to specify a specific partition.

    and yes, the forums don't seem to have a lot of activity lately. I've been trying to make a few posts here and there though

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD picture

IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD

$399.99



IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server  picture

IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server

$209.98



IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES picture

IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES

$27.25



IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server picture

IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server

$191.99



Lenovo IBM x3500 M5 Tower Server E5-2670 V3 2.30GHz picture

Lenovo IBM x3500 M5 Tower Server E5-2670 V3 2.30GHz

$999.99



IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs picture

IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs

$65.02



IBM System x3550 M4 Server 2 x Intel Xeon E5-2609 36GB RAM No HDDs picture

IBM System x3550 M4 Server 2 x Intel Xeon E5-2609 36GB RAM No HDDs

$89.99



IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W picture

IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W

$199.00



IBM System X3500 M4 7383AC1 (E5-2650 v2 2.60GHz - 192GB RAM - M2000 - NO OS/HDD) picture

IBM System X3500 M4 7383AC1 (E5-2650 v2 2.60GHz - 192GB RAM - M2000 - NO OS/HDD)

$264.92



IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED picture

IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED

$99.99