Results 1 to 2 of 2

Thread: Invitation to create sda3 for KNOPPIX-DATA has disappeared - why?

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    Invitation to create sda3 for KNOPPIX-DATA has disappeared - why?

    I have been using KNOPPIX 8.6.1 since announcement, installed to tiny bootable sticks and also to large capacity bootable mobile drives.
    In the past, at first use, I have always got a nag to create an additional partition sda3 (reiserfs) to host /KNOPPIX-DATA/ which has provided a limited but useful personalised platform.
    I recently installed the same thing 8.6.1 from the identcal original iso to a new stick and also to a different mobile drive.
    I have altered nothing!
    But there is no nag to create sda3; and even if I create it and format it, no oppotunity to use it as described (KNOPPIX-DATA) is either offered or enacted.
    I've not obviously changed anything whatsoever (other than the physical devices).
    Can anybody explain the inexplicable??
    Thank you.
    PS Almost no activity on this forum during 2022, 2023. Has the user base shrunk? Or is everybody but me too expert to need recourse to a forum??

  2. #2
    Member registered user
    Join Date
    Apr 2007
    Posts
    94
    Quote Originally Posted by fergus View Post
    I have been using KNOPPIX 8.6.1 since announcement, installed to tiny bootable sticks and also to large capacity bootable mobile drives.
    In the past, at first use, I have always got a nag to create an additional partition sda3 (reiserfs) to host /KNOPPIX-DATA/ which has provided a limited but useful personalised platform.
    I recently installed the same thing 8.6.1 from the identcal original iso to a new stick and also to a different mobile drive.
    I have altered nothing!
    But there is no nag to create sda3; and even if I create it and format it, no oppotunity to use it as described (KNOPPIX-DATA) is either offered or enacted.
    I've not obviously changed anything whatsoever (other than the physical devices).
    Can anybody explain the inexplicable??
    Thank you.
    PS Almost no activity on this forum during 2022, 2023. Has the user base shrunk? Or is everybody but me too expert to need recourse to a forum??

    I can't explain the strange behavior. Perhaps it behaves a little differently if you're installing to a hard disk versus a removable usb drive.
    Is your system booting as UEFI or legacy?


    However, you might download knoppix 9.1 which has been out for awhile (2 years now) and run with an updated system.

    I've almost always gone with using an overlay file instead of overlay partition. Of course it's limited to 4GB because of FAT32. You can mount other partitions with the file manager after booting if you need a large place for data.

    The only annoying thing is that the overlay files tend to get corrupted from time to time and need to get rebooted with "noimage" cheat code to run fsck.ext2 /mnt-system/KNOPPIX/knoppix-data.img


    You could create any partition manually that you need with gparted if you absolutely need an overlay partition. I remember awhile ago trying to make it manually, are you sure you did reiserfs? (can't remember as it's been awhile since I used 8.6) It should just use it if it's there.

    Interestingly, I installed KNOPPIX 9.1 to the hard drive with an overlay file and it removed the knoppix-data.inf file from /mnt-system/KNOPPIX.
    That file contained a single line: "3 /KNOPPIX-DATA reiserfs" which I believe means look for the 3rd partition and mount it at /KNOPPIX-DATA and use reiserfs.

    Now if I boot knoppix from the dvd-rom, it is so good at auto-finding my knoppix on the hard drive that I had to make a new partition as ext4 and dd if=/dev/sr0 of=/media/sda2/k91.iso bs=1M to copy the dvd to the hard drive and boot with "knoppix64 bootfrom=k91.iso" to see that knoppix-data.inf file (it auto searches each parition for the file).

    Note also that you don't actually have to reformat your hard drive and repartition, you can boot from the dvd-rom and use knoppix tohd=/dev/sda1 to copy the knoppix files to the hard drive partition and it will do most everything that a hard drive installation will do except for the "boot sector" booting. So you just have to use a dvd-rom to boot and knoppix will autofind it generally or you can use knoppix fromhd=/dev/sda1 to specify a specific partition.

    and yes, the forums don't seem to have a lot of activity lately. I've been trying to make a few posts here and there though

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord

$43.95



lot of 10 Juniper EX-SFP-10GE-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM -J499 picture

lot of 10 Juniper EX-SFP-10GE-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM -J499

$220.00



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$210.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested picture

Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested

$205.00



Juniper Networks EX2200-C-12P-2G 12 Port Gigabit PoE 2 T/SFP 1G Network Switch picture

Juniper Networks EX2200-C-12P-2G 12 Port Gigabit PoE 2 T/SFP 1G Network Switch

$129.00



Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord picture

Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord

$53.99



EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED picture

EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED

$450.00



JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED picture

JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED

$299.99



Juniper EX2300-48P  PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested picture

Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested

$289.00