Guess there is a problem with your hardware. you can try some of the cheatcodes (f1 on start for info, check the wiki on this site for more).
Hi!
Iīm an absolute noob to linux, but since i read much stuff about knoppix in cīt i tried it out.
Hereīs my problem: if i run knoppix from cd and boot normally i canīt see anything on my screen but grey flickering. If i start with the option 'failsafe' it works, but my mouse wonīt work
I use an Eizo Flexscan L 565 Screen, a NVidia GeForce Ti4400, i connected both with the DVI-I-Cable. My mouse is an MS Wireless Intellimouse Explorer.
Guess there is a problem with your hardware. you can try some of the cheatcodes (f1 on start for info, check the wiki on this site for more).
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.30
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.30
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99