-
Can't find Knoppix filesystem
I have a functioning Knoppix CD which I frequently use in my (relatively) new P4 system.
However, I recently made a boot floppy to use this same CD in my ten year old Pentium MMX system (which can't boot from CD).
Everything seems to work fine, as Knoppix finds my SCSI Plextor CD-ROM and uses fdomain.o, but it then scans multiple directories and gives me the error "Can't find Knoppix filesystem..." and something about a "(very limited) shell".
Any thoughts?
BTW, I'm new to Linux and Knoppix...
-
Senior Member
registered user
I know that you say you have a functioning knoppix cd, but you ought nevertheless to check the integrity of the disk. Try booting from the computer that works, but boot with the following cheat code: knoppix testcd
The only other thing I can think of is if your mmx machine as a really small amount of ram.
-
Used testcd cheat code, and everything checked out ok.
The MMX machine has 96Mb of RAM...
-
Being new... does the lack of replies indicated that:
(1) I've posted this in the wrong place
(2) This is a silly question that's been rehashed dozens of times, or
(3) Nobody has any insight as to what's wrong with my system...
-
Knoppix 3.3 and KnoppMyth
I also have this error. I tried Knoppix 3.3 on a machine at work, and got this error. A week later, I tried to install KnoppMyth on a computer at home and got the same error. I don't know what version Knoppix KnoppMyth is based on, but the only similarity I found between the two installs was both computers are Dells. One a Dimension 4400 & the other a Precision 450.
I did some research:
http://www.knoppix-std.org/faq.html
and found this:
I get the error “Can't find Knoppix filesystem.” then it drops me to a “limited shell”. What the hell?
This means you are not using a SCSI or IDE CDROM drive. After Syslinux starts up the first thing Knoppix wants to do is find and uncompress the filesystem (that big KNOPPIX file on the CD). Knoppix only probes for the CD on all SCSI and IDE buses. If it can't find it you'll get the error above.
For Transmeta laptops and some Sonys with PCMCIA cd drives try:
knoppix ide2=0x180 nopcmcia
Now I'm a bit confused, because both of my machines have the standard CDROM on the IDE bus. So, I don't get it. Maybe a problem with dells?
Hope that helps.
Similar Threads
-
By boomer777 in forum Hardware & Booting
Replies: 0
Last Post: 06-11-2005, 10:26 PM
-
By mariuss in forum Hardware & Booting
Replies: 2
Last Post: 02-23-2005, 02:48 AM
-
By colonius in forum Customising & Remastering
Replies: 1
Last Post: 11-20-2004, 06:09 PM
-
By pskipw in forum General Support
Replies: 0
Last Post: 05-07-2004, 06:16 AM
-
By sfit in forum Customising & Remastering
Replies: 1
Last Post: 03-18-2004, 05:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin
$14.35
HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco
$13.99
A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G
$27.98
Crucial DDR3 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3L 16G DDR3L
$21.95
Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM
$64.99
A-Tech 64GB 4x 16GB 2Rx4 PC4-19200R DDR4 2400MHz ECC REG RDIMM Server Memory RAM
$87.96