-
Can't find Knoppix filesystem
I have a functioning Knoppix CD which I frequently use in my (relatively) new P4 system.
However, I recently made a boot floppy to use this same CD in my ten year old Pentium MMX system (which can't boot from CD).
Everything seems to work fine, as Knoppix finds my SCSI Plextor CD-ROM and uses fdomain.o, but it then scans multiple directories and gives me the error "Can't find Knoppix filesystem..." and something about a "(very limited) shell".
Any thoughts?
BTW, I'm new to Linux and Knoppix...
-
Senior Member
registered user
I know that you say you have a functioning knoppix cd, but you ought nevertheless to check the integrity of the disk. Try booting from the computer that works, but boot with the following cheat code: knoppix testcd
The only other thing I can think of is if your mmx machine as a really small amount of ram.
-
Used testcd cheat code, and everything checked out ok.
The MMX machine has 96Mb of RAM...
-
Being new... does the lack of replies indicated that:
(1) I've posted this in the wrong place
(2) This is a silly question that's been rehashed dozens of times, or
(3) Nobody has any insight as to what's wrong with my system...
-
Knoppix 3.3 and KnoppMyth
I also have this error. I tried Knoppix 3.3 on a machine at work, and got this error. A week later, I tried to install KnoppMyth on a computer at home and got the same error. I don't know what version Knoppix KnoppMyth is based on, but the only similarity I found between the two installs was both computers are Dells. One a Dimension 4400 & the other a Precision 450.
I did some research:
http://www.knoppix-std.org/faq.html
and found this:
I get the error “Can't find Knoppix filesystem.” then it drops me to a “limited shell”. What the hell?
This means you are not using a SCSI or IDE CDROM drive. After Syslinux starts up the first thing Knoppix wants to do is find and uncompress the filesystem (that big KNOPPIX file on the CD). Knoppix only probes for the CD on all SCSI and IDE buses. If it can't find it you'll get the error above.
For Transmeta laptops and some Sonys with PCMCIA cd drives try:
knoppix ide2=0x180 nopcmcia
Now I'm a bit confused, because both of my machines have the standard CDROM on the IDE bus. So, I don't get it. Maybe a problem with dells?
Hope that helps.
Similar Threads
-
By boomer777 in forum Hardware & Booting
Replies: 0
Last Post: 06-11-2005, 10:26 PM
-
By mariuss in forum Hardware & Booting
Replies: 2
Last Post: 02-23-2005, 02:48 AM
-
By colonius in forum Customising & Remastering
Replies: 1
Last Post: 11-20-2004, 06:09 PM
-
By pskipw in forum General Support
Replies: 0
Last Post: 05-07-2004, 06:16 AM
-
By sfit in forum Customising & Remastering
Replies: 1
Last Post: 03-18-2004, 05:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HP Proliant DL360 Gen9 1x E5-2620 V3 2.40GHZ 32GB DDR4-1866MHZ 2x 500W PSU
$105.95