Results 1 to 6 of 6

Thread: Linksys WPC11 PCMCIA not supported?

  1. #1
    Gulliver
    Guest

    Linksys WPC11 PCMCIA not supported?

    Hi you all.

    My Linksys WPC11 PCMCIA card is not recognised. The crdmgr says that is is not supported.
    Everything works fine with an Avaya Silver.

    Any suggestion?

    Thanks, Gulliver

  2. #2
    Junior Member
    Join Date
    Dec 2002
    Posts
    1
    I have my WPC11 card working in an IBM Thinkpad 770Z.

    Here are some tips that may or may not be helpful:
    - I am using the Dec 07, 2002 Knoppix release
    - I have recently upgraded the firmware for the card. (see the linksys site)
    - To get it running, I boot up with the card removed from the machine, then after the system comes up I edit the /etc/pcmcia/network.opts and /etc/pcmcia/wlan-ng.opts files so that they have the correct values for my setup (actually I repoint the link to different copies of these files on my HD.)
    - Then I insert the card and it "just works"

    I don't know if this will help or not, but this is what I did to get this working.

    (One other note: From what I have read, there are some WPC11 cards (Version 2.7 IIRC), that use a different chipset, and may not work at all)

  3. #3
    Gulliver
    Guest
    Thanks RickW!

    Indeed, using the latest version of Knoppix everything works fine.

    Regards, Gulliver

  4. #4
    Junior Member registered user
    Join Date
    Dec 2002
    Location
    Minnesota
    Posts
    21

    WPC11 linksys

    I have a SAGER LAPTOP computer and I have the December 12 version of knoppix installed on the HD and I can't get my wireless card to configure... It sais that I need to upgrade from version 14 to 15 ....
    I am going to try to get the pcmcia ops set but I would like someone to give me some ideas..

  5. #5
    Member registered user
    Join Date
    Dec 2002
    Posts
    75

    FOUND THE FAQ FOR THIS

    check out this url for this info... dont exactly know how much it will help but it is pretty specific...


    http://www.linuxhq.com/ldp/howto/min...C11/index.html

  6. #6
    lojiego
    Guest
    hat exactly did you do to the network.ops file? i'm trying to egt it to work rigth now.. and i nkow i hav to disable something... but it's the second thing i'ev ever editintg in linux... so I'm nto sure wh at it is...

    So far i've commented out the bottom part.. the onet hat says it's okto deleat if nto desired..

Similar Threads

  1. Kismet with Linksys WPC11 for Knoppix 3.4
    By bljohnson in forum Laptops
    Replies: 0
    Last Post: 05-06-2004, 11:06 PM
  2. Linksys WPC11 v4 - Realtek Drivers
    By bljohnson in forum Hardware & Booting
    Replies: 0
    Last Post: 04-23-2004, 10:41 PM
  3. Replies: 7
    Last Post: 04-06-2004, 08:35 PM
  4. Linksys WPC11 and Knoppix
    By PAlvarez in forum Networking
    Replies: 6
    Last Post: 02-02-2004, 11:47 PM
  5. Linksys wpc11 (v. 2.5), Knoppix 27-06
    By cgoodier in forum Networking
    Replies: 11
    Last Post: 10-13-2003, 01:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •