Did you try as su or root):
This worked for me.Code:mount /dev/hda1 /mnt/hda1 -oremount,rw
Hello,
I have installed Knoppix on my HD, and it's working fine
Just a problem for the hda1winslow98 access wich is mounted in root mode.
I tried to chmod 755 it, but, no result, I can accessing to it only as su.
if someone know the solution...
Did you try as su or root):
This worked for me.Code:mount /dev/hda1 /mnt/hda1 -oremount,rw
I tried the command, but it has not worked
I found that in /etc/fstab, the hda1 entry was preceded by a # and the mode was noauto
After deleting # and converting noauto by auto & rebooting, it's working fine
but...the floppy have the same problem, and the /etc/fstab entry is
/dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 (with no #)
is it the same problem ? 2 advice are better than 1
ThX
Normally you have to mount a floppy disk by hand, because each time you change the floppy it has to be unmounted before you remove it and mounted after youput the new one in.
Yes it works, and I'm happy that KNOPPIX does'nt use automount by default ; it's a source of problems with a lot of "big" linux distros.
Thank you
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98