Results 1 to 3 of 3

Thread: 9.1: Install grub 2.x for secure boot

  1. #1
    Junior Member registered user
    Join Date
    Sep 2009
    Posts
    21

    9.1: Install grub 2.x for secure boot

    Hello,

    I used the following steps to install grub 2.0 under knoppix 9.1

    Code:
    mkfs.fat -F32 /dev/sdb1
    mount -t vfat /dev/sdb1 /media/sdb1
    apt-get install grub-efi-amd64-signed
    grub-install --boot-directory=/media/sdb1/boot --efi-directory=/media/sdb1 --uefi-secure-boot
    But after boot I got the red sign which alerts that some files are not signed.
    Can you please advise what is missing in my steps ?

    I found the following link:
    http://www.fit-pc.com/wiki/index.php/Linux:_Secure_Boot

    I wonder if I need this complicated procedure with knoppix.

    Thank you,
    Zvika

  2. #2
    Junior Member registered user
    Join Date
    Sep 2009
    Posts
    21
    Hello,

    Thanks to the huge help I got in the grub mail list, grub is now booting under secure boot.

    I had 2 problems:

    1. The shim packages I had are for i386 not amd64. So I installed the right shim packages.

    2. I had to run grub-install under knoppix 9.1 which was booted in secure boot=enable in BIOS.
    Till I did it, I got the following warning:

    Quote:
    grub-install: warning: EFI variables are not supported on this system.

    Thank you,
    Zvika

  3. #3
    Junior Member registered user
    Join Date
    Sep 2009
    Posts
    21
    Hello,

    According to the following link:
    https://www.youtube.com/watch?v=6JhMSKvf6Kw
    The "EFI variables are not supported on this system" can be fixed by running:

    modprobe efivarfs
    mount -t efivarfs efivarfs /sys/firmware/efi/efivars

    According to few links I found, the cause is that Knoppinx (in my case) is booting from USB stick.
    I think (not sure) this is a BUG.

    Thank you,
    Zvika


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00



New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module picture

New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module

$19.99



Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW picture

Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW

$68.00



Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX picture

Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX

$499.99



NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit) picture

NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit)

$39.95



🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥 picture

🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥

$6.80



GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture

GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03

$6.80



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T

$47.49



Finisar Accessory FTLF1318P3BTL 1.25Gb/s SFP Transceiver RoHS Compliant 1310nm picture

Finisar Accessory FTLF1318P3BTL 1.25Gb/s SFP Transceiver RoHS Compliant 1310nm

$31.01



NEW Sealed Cisco GLC-TE SFP Copper RJ45 100m 1000BASE-T Transceiver*US Shipping* picture

NEW Sealed Cisco GLC-TE SFP Copper RJ45 100m 1000BASE-T Transceiver*US Shipping*

$20.00