-
Junior Member
registered user
9.1: Install grub 2.x for secure boot
Hello,
I used the following steps to install grub 2.0 under knoppix 9.1
Code:
mkfs.fat -F32 /dev/sdb1
mount -t vfat /dev/sdb1 /media/sdb1
apt-get install grub-efi-amd64-signed
grub-install --boot-directory=/media/sdb1/boot --efi-directory=/media/sdb1 --uefi-secure-boot
But after boot I got the red sign which alerts that some files are not signed.
Can you please advise what is missing in my steps ?
I found the following link:
http://www.fit-pc.com/wiki/index.php/Linux:_Secure_Boot
I wonder if I need this complicated procedure with knoppix.
Thank you,
Zvika
-
Junior Member
registered user
Hello,
Thanks to the huge help I got in the grub mail list, grub is now booting under secure boot.
I had 2 problems:
1. The shim packages I had are for i386 not amd64. So I installed the right shim packages.
2. I had to run grub-install under knoppix 9.1 which was booted in secure boot=enable in BIOS.
Till I did it, I got the following warning:
Quote:
grub-install: warning: EFI variables are not supported on this system. |
Thank you,
Zvika
-
Junior Member
registered user
Hello,
According to the following link:
https://www.youtube.com/watch?v=6JhMSKvf6Kw
The "EFI variables are not supported on this system" can be fixed by running:
modprobe efivarfs
mount -t efivarfs efivarfs /sys/firmware/efi/efivars
According to few links I found, the cause is that Knoppinx (in my case) is booting from USB stick.
I think (not sure) this is a BUG.
Thank you,
Zvika
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$419.99
Cisco 10-2456-03 Genuine Cisco SFP-10G-LRM V03 10GBASE-LRM SFP+Transceiver
$21.24
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New Cisco w/ Hologram SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28 Transceiver Module
$69.99
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99