-
Junior Member
registered user
9.1: Install grub 2.x for secure boot
Hello,
I used the following steps to install grub 2.0 under knoppix 9.1
Code:
mkfs.fat -F32 /dev/sdb1
mount -t vfat /dev/sdb1 /media/sdb1
apt-get install grub-efi-amd64-signed
grub-install --boot-directory=/media/sdb1/boot --efi-directory=/media/sdb1 --uefi-secure-boot
But after boot I got the red sign which alerts that some files are not signed.
Can you please advise what is missing in my steps ?
I found the following link:
http://www.fit-pc.com/wiki/index.php/Linux:_Secure_Boot
I wonder if I need this complicated procedure with knoppix.
Thank you,
Zvika
-
Junior Member
registered user
Hello,
Thanks to the huge help I got in the grub mail list, grub is now booting under secure boot.
I had 2 problems:
1. The shim packages I had are for i386 not amd64. So I installed the right shim packages.
2. I had to run grub-install under knoppix 9.1 which was booted in secure boot=enable in BIOS.
Till I did it, I got the following warning:
Quote:
grub-install: warning: EFI variables are not supported on this system. |
Thank you,
Zvika
-
Junior Member
registered user
Hello,
According to the following link:
https://www.youtube.com/watch?v=6JhMSKvf6Kw
The "EFI variables are not supported on this system" can be fixed by running:
modprobe efivarfs
mount -t efivarfs efivarfs /sys/firmware/efi/efivars
According to few links I found, the cause is that Knoppinx (in my case) is booting from USB stick.
I think (not sure) this is a BUG.
Thank you,
Zvika
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$29.91
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks SRX345 Gateway Appliance
$195.00
Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P
$179.99
Juniper EX4200-48PX 48-PORT 10/100/1000BASET PoE Ethernet Switch
$36.15
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$140.00
Juniper EX2200-C-12T-2G Fanless 12-port Ethernet Switch with 2 SFP
$75.77
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00