Sorry - possibly the most naive question it is possible to ask.
I've searched this forum and got a flood of hits from Google (and have tried the simplest solution described below) but still not got quite what I would prefer.
In the rawest possible Knoppix console (i.e. init 1) what I assume to be the default cursor (since I haven't changed or asked for anything else) is a blinking underline.
This persists into nano, my preferred text editor.
In both cases I prefer a non-blinking full-height block with the added property that when superimposed over a character as when editing a command line in bash or editing text in an editor, that character "shows through". i.e. the solid cursor is also transparent.
I tried the command
echo 0 > /sys/module/vt/parameters/cur_default
at the command-line which seemed to have some effect (blinking block which is halfway there) and other instructions echo 1, echo 2, .. had different effects e.g. half-height block but (a) none of them were what I was actually wanting and (b) the effect did not seem to be immediate but occurred at some short interval later. (Yes? My perceptions are surely faulty.)
Is this even the beginnings of the right approach?
If so can you tell me the correct echo n?
Do I need to issue the command not at the command line but in /etc/profile? .. or in ~/.bashrc or .. ?
I guess the nano requirement should be managed separately. (But it might carry over.)
Thank you!
PS In the bash console emulator "mintty" in Cygwin, the solid transparent unblinking full-height cursor is the default and persists into nano. Wish I knew how to mimic it in Knoppix.
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
HP ProLiant BL460c Gen8 G8 Blade Server 2x Intel Xeon 10-Core E5-2670v2 NO RAM
$40.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge FC430 Blade with 2 x Xeon 2680v3 CPUs
$119.99
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
DELL PowerEdge M630 Blade 2x E5-2620v4 2.1GHz 16 Cores 32GB H330 Choose Drives
$285.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$219.00