Sorry - possibly the most naive question it is possible to ask.
I've searched this forum and got a flood of hits from Google (and have tried the simplest solution described below) but still not got quite what I would prefer.
In the rawest possible Knoppix console (i.e. init 1) what I assume to be the default cursor (since I haven't changed or asked for anything else) is a blinking underline.
This persists into nano, my preferred text editor.
In both cases I prefer a non-blinking full-height block with the added property that when superimposed over a character as when editing a command line in bash or editing text in an editor, that character "shows through". i.e. the solid cursor is also transparent.
I tried the command
echo 0 > /sys/module/vt/parameters/cur_default
at the command-line which seemed to have some effect (blinking block which is halfway there) and other instructions echo 1, echo 2, .. had different effects e.g. half-height block but (a) none of them were what I was actually wanting and (b) the effect did not seem to be immediate but occurred at some short interval later. (Yes? My perceptions are surely faulty.)
Is this even the beginnings of the right approach?
If so can you tell me the correct echo n?
Do I need to issue the command not at the command line but in /etc/profile? .. or in ~/.bashrc or .. ?
I guess the nano requirement should be managed separately. (But it might carry over.)
Thank you!
PS In the bash console emulator "mintty" in Cygwin, the solid transparent unblinking full-height cursor is the default and persists into nano. Wish I knew how to mimic it in Knoppix.
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$269.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
$198.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP ProLiant MicroServer Gen8 | Intel XEON E3-1220L V2 | 8GB RAM | NO HDD | 4 BAY
$249.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 AMD Opteron X3216 8GB RAM No HDDs
$325.00
HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested,
$99.99
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00