By making substantial use of KNOPPIX-DATA on a reiserfs formatted /dev/sda3 I have managed to customise KNOPPIX at boot pretty well as preferred.
However: one final (almost trivial) alteration eludes me.
I would like to tweak the boot init executable file which I think is the one that resides in minirt.gz.
Using a temporary ext2 filesystem as my vehicle for managing this:
1) copy minirt.gz to temp and de-compress minirt.gz using gunzip: this yields a file minirt
2) move to a dofferent subdirectory under temp and extract minirt here with the command cpio -idm < {pathto}/minirt
3) the init file is seen here: edit it - (I'm just tweaking the messages sent to screen at boot) - and save it
4) chmod a+x init and chmod a+w init, as originally found
5) wrap the while thing as a revised minirt to a different subdirectory under temp using find . | cpio -o > {newpathto}/minirt
6) compress the new minirt using gzip --recursive --rsyncable (not sure whether either switch is actiually required)
and finally
7) save the old minirt.gz as minirt.orig.gz in case of failure (see below!)
8 ) copy the new minirt.gz to replace the original.
Then reboot, hoping for success.
But actually get failure at boot with the error message:
"kernel panic - not syncing - unable to mount root fs on unknown-block(0,0)"
I feel I'm almost there at my ideal customised KNOPPIX, and without the hugely complex time-consuming and likely error-prone process of re-mastering.
Has anybody else tried this easier approach and successfully replaced minirt.gz with their own version?
Thank you for any insight or refined practice for 1-8 above .. ..
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
DELL PowerEdge R730 Server 2x E5-2690v4 2.6GHz =28 Cores 32GB H730 4xRJ45
$333.00
DELL PowerEdge R630 8SFF Server 2x E5-2650v4 2.2GHz =24 Cores 32GB H730 4xRJ45
$240.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
HP Proliant DL360 G9 2x3.4GHz Intel Hexa Core Xeon E5-2643v3, 24GB RAM, NO HDD
$124.99
Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD
$89.99
Dell PowerEdge R630 Server 2x E5-2680 V3 =24 Cores | 128GB | H730 | 2x 600GB SAS
$464.99
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99