By making substantial use of KNOPPIX-DATA on a reiserfs formatted /dev/sda3 I have managed to customise KNOPPIX at boot pretty well as preferred.
However: one final (almost trivial) alteration eludes me.
I would like to tweak the boot init executable file which I think is the one that resides in minirt.gz.
Using a temporary ext2 filesystem as my vehicle for managing this:
1) copy minirt.gz to temp and de-compress minirt.gz using gunzip: this yields a file minirt
2) move to a dofferent subdirectory under temp and extract minirt here with the command cpio -idm < {pathto}/minirt
3) the init file is seen here: edit it - (I'm just tweaking the messages sent to screen at boot) - and save it
4) chmod a+x init and chmod a+w init, as originally found
5) wrap the while thing as a revised minirt to a different subdirectory under temp using find . | cpio -o > {newpathto}/minirt
6) compress the new minirt using gzip --recursive --rsyncable (not sure whether either switch is actiually required)
and finally
7) save the old minirt.gz as minirt.orig.gz in case of failure (see below!)
8 ) copy the new minirt.gz to replace the original.
Then reboot, hoping for success.
But actually get failure at boot with the error message:
"kernel panic - not syncing - unable to mount root fs on unknown-block(0,0)"
I feel I'm almost there at my ideal customised KNOPPIX, and without the hugely complex time-consuming and likely error-prone process of re-mastering.
Has anybody else tried this easier approach and successfully replaced minirt.gz with their own version?
Thank you for any insight or refined practice for 1-8 above .. ..
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$271.00
DELL PowerEdge R630 8SFF Server 2x E5-2650v4 2.2GHz =24 Cores 32GB H730 4xRJ45
$240.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w
$359.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
HP Proliant DL360 G9 2x2.6GHz Intel 14 Core Xeon E5-2697v3, 32GB RAM, NO HDD
$139.99
Dell PowerEdge R720 Dual Intel Xeon E5-2690 @2.90GHz 32GB RAM No HDD H710P
$112.50
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99
Dell Poweredge R720xd 2x Xeon E5-2670 2.6GHz 16-Cores 64gb H710p 26x Trays
$339.99