When you say 2.4.2, was that a typo and do you mean 2.4.20? If you're running 2.4.2, I wouldn't be surprised if it didn't work.
I tried everything said in that thread, but I can't get it to work. I think it has to do with the fact that I have an A7v8x mobo with a built in NIC, so the eth0 gets loaded first, but I can't get ifconfig eth0 down to work because it says no such device. I read somewhere that turning off eth0 will make wlan0 work, but I just can't get it to work! And I do have kernel 2.4.2, so it's below 2.4.21. Any suggestions?
When you say 2.4.2, was that a typo and do you mean 2.4.20? If you're running 2.4.2, I wouldn't be surprised if it didn't work.
i used the binary Ndiswrapper at http://homepage.ntlworld.com/martin_...pper/home.html with MDK 9.2 and an ASUS WL-100g (Broadcom) and it works like a charmOriginally Posted by idle0ne
![]()
anyone have any luck with the DWL-650+?
Craig is trying to help me out over email right now actually.
I get the device not found error too, and it never supplied an IRQ to the card.
Any ideas?
I posted about this in the laptop forum, but this topic seems to be going in the same direction.![]()
Look at http://www.wickle.com/weblog/index.php?p=49&more=1,
there is a howto for DWL650+.
Grretings reiko
With the Intel Centrino driver out now for Linux, will we see it included in the next version of Knoppix? (please!?)
Scott
hey i have inspiron 5150 that has two nics, one being wireless, how in english do i get it to work with knoppix loll
i have a blitz router...
i am not sure what i need to do to set it up, i am booting from the cd not the hard drive..
also where does boot from cd save its files on hd, or does it save to ram instead..
is there problem with booting on a linux machine also
anyway i really need to get this working on the laptop..
it has dell truemobile 1300 wifi lan card
thanks for help guys sorry i so dumb to this, but i dont understand allot of the commands given and what they are for
To be honest, you probably won't see it for a while, Klaus Knopper takes a little while with the inclusion of drivers.Posted: Sun Mar 14, 2004 3:09 am
With the Intel Centrino driver out now for Linux, will we see it included in the next version of Knoppix? (please!?)
Scott
But, that is only so that the system doesn't break, or break another driver...
I also don't know the liscence that it is under, so he may not be able to include it with his GPL....
Here's hoping though, since the Centrino is a great platform, and it will make it easier to install.
By the way...
Here is the link for you all:
http://ipw2100.sourceforge.net/
Here's hoping!!
Scott
Does the Bufflao Airstation G54 WLI-CB-G54A work on Konppix 2-16-04?
If so could someone explain?
Teamgroup T-Force Delta RGB 32GB (2 x 16GB) 288-Pin PC RAM DDR5 7200 (PC5 57600)
$129.95
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$50.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$15.90
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
TEAMGROUP T-FORCE VULCAN 16GB DDR5-6000 1Rx8 DESKTOP RAM FLRD516G6000HC38ABK
$44.97
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$33.99
HP EliteBook 840 G10 14 WUXGA Intel Core i5-1335U 16GB RAM 512GB SSD Notebook S
$599.99
Dell SNPTP9W1C/16G 16 GB 2666MHz (PC4-2666) Memory Ram
$25.95