-
Lost my Admin password Help!
Help
I installed a new vid card and drive in my computer. I had Knoppix 9/5/03 but it would not boot to the new vid card (GForce 4) So I installed Knoppix 9/22/03 to the new hd and left the old Knoppix alone hoping to be able to transfer docs and files. All is well except I aparently mistyped my Administrators password! Now I can't do anything except user priv.
Is it possible to copy the old password file from the old install onto the new install to correct this? Or am I looking at a reinstall?
Please help
Thanks
-
Senior Member
registered user
Bummer- I guess you better reinstall......er wait- no that's wondoze. Sorry for the scare.
Hold the TAB key before lilo comes up, it will give you a prompt. Enter this:
linux single
It will boot to run level 1. You will be root. Enter this:
passwd
Reboot
*However.......this may not work. In that case...
Boot Knoppix cd.
Mount your /root partition:
sudo mount /dev/hdx? /mnt/hdx?
sudo chroot /mnt/hdx?
passwd
Exit chroot:
CTRL+D
Enjoy
-
The strange part is I do not get the log on screen now. I installed with "Like CD" option. Is there a way to reactivate that log in?
Thanks
Oh and Thank you for your help!
-
Senior Member
registered user
Originally Posted by
dave52355
The strange part is I do not get the log on screen now. I installed with "Like CD" option. Is there a way to reactivate that log in?
Thanks
Oh and Thank you for your help!
If you installed it Knoppix style or as the cd, then all you have to do is this:
Then you will be root and you can do "passwd"
This is kind of scary isn't it. I don't think it's a good idea for an install to be setup like this, but I think it's inevitalbe on the Knoppix style install. You can probably change this if you loot at /etc/profile and do a little editing.
-
Well its not Windows, but I opted for the reinstall. KDM was not loading and when I changed inittab from id:5 to id:4 only one user could log in from text mode. Than startx would bring up a really ugly gui in German. It was time to pull the plug!
This time I'm going with the Debian style install.
Now once it is up, I need to figure out the Nvidia driver thing for my Gforce4 MMX card.
Thanks
-
Senior Member
registered user
Originally Posted by
dave52355
Now once it is up, I need to figure out the Nvidia driver thing for my Gforce4 MMX card.
Thanks
This thread may help.
Similar Threads
-
By mediaparty in forum General Support
Replies: 0
Last Post: 02-14-2004, 11:36 PM
-
By lello107 in forum General Support
Replies: 4
Last Post: 11-25-2003, 01:26 AM
-
By dennison_b in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-07-2003, 05:04 AM
-
By TheCyberDude in forum General Support
Replies: 0
Last Post: 06-19-2003, 10:43 PM
-
By Dave_Bechtel in forum General Support
Replies: 1
Last Post: 02-13-2003, 06:45 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell Poweredge M630 Barebone CTO Blade Server includes 2x Heatsinks
$99.00
Dell PowerEdge MX7000 CTO Blade 8 slot 7U Chassis 6x 3000W 2x MX9002m
$2399.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99