-
Add special hardware to the hardware detection on boot
Hello,
It is possible to add speciall interface card (NI PCI-GPIB) to the hardware detection routine ? The Linux driver for this card is available as loadable module.
Where can I find more information about the configuration of the hardware detection used in KNOPPIX ?
thx Danmak
-
Senior Member
registered user
I've opted to do a HD install using the Knoppix-installer and chosen to make that a Debian style install. (see the significance later) I've been playing around with Kino which requires modules 'raw1394 and ohci1394 to be loaded, so Kino can control the i/f directly. What I did, was just add them to '/etc/init.d/bootmisc.sh' that is I added the following lines:-
modprobe raw1394
modprobe ohci1394
Unfortunately, if you have a Knoppix style install, you won't find bootmisc.sh - all the clever stuff is done with this script (and probably others):-
/etc/init.d/knoppix-autoconfig
-It's rather complex, I got no further than commenting out a couple of lines to trick the script into enabling dma by default!!! You might recognise some of it running at boot time.....
Stu.....
-
Senior Member
registered user
PS. I'm a linux newbie, so I could be suggesting quite the wrong way to do things!!!
-
Similar Threads
-
By obsoleto in forum Hardware & Booting
Replies: 1
Last Post: 06-04-2004, 05:11 PM
-
By jcostello in forum Hardware & Booting
Replies: 1
Last Post: 04-24-2004, 01:33 AM
-
By FlorianK in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 12-11-2003, 03:31 PM
-
By staverts in forum Hardware & Booting
Replies: 0
Last Post: 07-28-2003, 06:48 AM
-
By Christer in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 04-02-2003, 03:32 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture](/store/img/g/d3AAAOSw35dlrsCo/s-l225/Cisco-Nexus-N9K-C92160YC-X-48P-25GbE-SFP28-6P-QSFP.jpg)
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$499.00
![Cisco IE-1000-8P2S-LM Industrial Ethernet Switch New Sealed picture](/store/img/g/s8IAAOSwtZBlgT3v/s-l225/Cisco-IE-1000-8P2S-LM-Industrial-Ethernet-Switch-N.jpg)
Cisco IE-1000-8P2S-LM Industrial Ethernet Switch New Sealed
$995.57
![Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE picture](/store/img/g/FnMAAOSwAO9lrsAL/s-l225/Cisco-Nexus-N3K-C3172PQ-10GE-48P-10GbE-6P-QSFP-Swi.jpg)
Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE
$189.00
![Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair) picture](/store/img/g/K9MAAOSw-4JmfV3v/s-l225/Cisco-Nexus-N3K-C3064PQ-10GX-48P-10GbE-SFP-4P-QSFP.jpg)
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)
$85.00
![Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture](/store/img/g/yEAAAOSwxVReIhma/s-l225/Cisco-C3850-NM-2-10G-2-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
![GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture](/store/img/g/tAkAAOSwdENkHItI/s-l225/GENUINE-Cisco-SFP-10G-SR-V03-SFP-GBIC-Transceiver-.jpg)
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
![Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture](/store/img/g/qPUAAOSwuOJd2AEx/s-l225/Cisco-C3850-NM-4-10G-4-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$139.99
![🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥 picture](/store/img/g/KTkAAOSwcmBisISE/s-l225/-CISCO-SFP-10G-SR-V03-10-2415-03-850nm-10GBASE-SR-.jpg)
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
![Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP picture](/store/img/g/IwQAAOSw5A9mS3oa/s-l225/Cisco-Nexus-48-Port-10G-SFP-Switch-N9K-93128TX-w-9.jpg)
Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP
$112.49
![Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture](/store/img/g/cqoAAOSwtYVmS7LQ/s-l225/Cisco-WS-C2960X-48FPD-L-48-V07-POE-GE-2-10G-SFP-LA.jpg)
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00