Results 1 to 4 of 4

Thread: Add special hardware to the hardware detection on boot

  1. #1
    Junior Member
    Join Date
    Oct 2003
    Posts
    3

    Add special hardware to the hardware detection on boot

    Hello,

    It is possible to add speciall interface card (NI PCI-GPIB) to the hardware detection routine ? The Linux driver for this card is available as loadable module.
    Where can I find more information about the configuration of the hardware detection used in KNOPPIX ?

    thx Danmak

  2. #2
    Senior Member registered user
    Join Date
    Oct 2003
    Location
    Midlands, UK
    Posts
    145
    I've opted to do a HD install using the Knoppix-installer and chosen to make that a Debian style install. (see the significance later) I've been playing around with Kino which requires modules 'raw1394 and ohci1394 to be loaded, so Kino can control the i/f directly. What I did, was just add them to '/etc/init.d/bootmisc.sh' that is I added the following lines:-

    modprobe raw1394
    modprobe ohci1394

    Unfortunately, if you have a Knoppix style install, you won't find bootmisc.sh - all the clever stuff is done with this script (and probably others):-

    /etc/init.d/knoppix-autoconfig

    -It's rather complex, I got no further than commenting out a couple of lines to trick the script into enabling dma by default!!! You might recognise some of it running at boot time.....

    Stu.....

  3. #3
    Senior Member registered user
    Join Date
    Oct 2003
    Location
    Midlands, UK
    Posts
    145
    PS. I'm a linux newbie, so I could be suggesting quite the wrong way to do things!!!

  4. #4
    Junior Member
    Join Date
    Nov 2003
    Posts
    3
    To get the modules loaded on a hd install just add them to /etc/modules ..

    Check out my article on how to set up non-linear video editing on Debian/knoppix

Similar Threads

  1. Hardware Detection question
    By obsoleto in forum Hardware & Booting
    Replies: 1
    Last Post: 06-04-2004, 05:11 PM
  2. Hardware detection
    By jcostello in forum Hardware & Booting
    Replies: 1
    Last Post: 04-24-2004, 01:33 AM
  3. Trouble after dual-boot install (Grub, hardware detection)
    By FlorianK in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 12-11-2003, 03:31 PM
  4. Hardware Detection
    By staverts in forum Hardware & Booting
    Replies: 0
    Last Post: 07-28-2003, 06:48 AM
  5. Hardware detection after HD install
    By Christer in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 04-02-2003, 03:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M picture

For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M

$25.99



CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC  10G 10GB SFP - 1 Year Warranty picture

CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty

$39.99



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



HP 1Gb SFP RJ-45 Module 453156-001 picture

HP 1Gb SFP RJ-45 Module 453156-001

$2.50



Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module picture

Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module

$7.90



10-2415-03 Genuine CISCO SFP-10G-SR 850nm 10GBASE-SR SFP+ Transceiver V03 picture

10-2415-03 Genuine CISCO SFP-10G-SR 850nm 10GBASE-SR SFP+ Transceiver V03

$8.90



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$7.48



CISCO SFP-GE-T Copper Transceiver Module   picture

CISCO SFP-GE-T Copper Transceiver Module

$11.99