-
Add special hardware to the hardware detection on boot
Hello,
It is possible to add speciall interface card (NI PCI-GPIB) to the hardware detection routine ? The Linux driver for this card is available as loadable module.
Where can I find more information about the configuration of the hardware detection used in KNOPPIX ?
thx Danmak
-
Senior Member
registered user
I've opted to do a HD install using the Knoppix-installer and chosen to make that a Debian style install. (see the significance later) I've been playing around with Kino which requires modules 'raw1394 and ohci1394 to be loaded, so Kino can control the i/f directly. What I did, was just add them to '/etc/init.d/bootmisc.sh' that is I added the following lines:-
modprobe raw1394
modprobe ohci1394
Unfortunately, if you have a Knoppix style install, you won't find bootmisc.sh - all the clever stuff is done with this script (and probably others):-
/etc/init.d/knoppix-autoconfig
-It's rather complex, I got no further than commenting out a couple of lines to trick the script into enabling dma by default!!! You might recognise some of it running at boot time.....
Stu.....
-
Senior Member
registered user
PS. I'm a linux newbie, so I could be suggesting quite the wrong way to do things!!!
-
Similar Threads
-
By obsoleto in forum Hardware & Booting
Replies: 1
Last Post: 06-04-2004, 05:11 PM
-
By jcostello in forum Hardware & Booting
Replies: 1
Last Post: 04-24-2004, 01:33 AM
-
By FlorianK in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 12-11-2003, 03:31 PM
-
By staverts in forum Hardware & Booting
Replies: 0
Last Post: 07-28-2003, 06:48 AM
-
By Christer in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 04-02-2003, 03:32 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
Dell M630 PowerEdge Blade Server
$700.00