If you still haven't gotten the cx5400 scanner to work, you should check out the user notes at http://www.linuxprinting.org/show_pr...-Stylus_CX5200
Let me know if this woks for you!
Hi,
I spend days trying to run a scanner on Knoppix.
I had a great Agfa SnapScan 1236 Scsi with a board Scsi Tekram. I could't make it work (width Linux, but with Windows 98se, it worked fine). I was told that the problem was the Scsi board. So I gave the scanner and board to my brother, and I bought an Epson Stylus CX5400 Usb (printer/scanner).
But I can't run it, I'm desesperate ! (But the printer part works well)
Here is the technical stuff :
Knoppix 3.2
Noyau 2.4.20
sane-find-scannerCode:Linux version 2.4.20-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian pre release)) #1 SMP Mit Mär 26 15:37:36 CET 2003
Code:# No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8, product=0x0808) at libusb:002:002 found USB scanner (vendor=0x0915, product=0x8000) at libusb:001:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
scanimage -L
Code:No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
I add Usb support in /etc/fstab :
Code:none /proc/bus/usb usbdevfs defaults 0 0
I tryed to remove Sane (root) :
and I renamed all files/folders sane* that were still on the hard drive,Code:apt-get remove sane*
then I installed sane (root) :
I copied the olders files into /etc/sane.d :Code:apt-get install sane-utils xsane
/etc/sane.d/dll.conf :
Code:# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader # # See the end of this file for information on some specific backends. epson
/etc/sane.d/epson.conf
Code:# epson.conf # # here are some examples for how to configure the EPSON backend # # SCSI scanner: # scsi EPSON # # Parallel port scanner: #pio 0x278 #pio 0x378 #pio 0x3BC # # USB scanner - only enable this if you have an EPSON scanner. It could # otherwise block your non-EPSON scanner from being # recognized. # Depending on your distribution, you may need either the # first or the second entry. #usb /dev/usbscanner0 usb /dev/usb/scanner0
I don't know what more to do. I don't understant anything about frontend backend all the configuration files Sane.
Well, I need precise help. I read FAQ, how-to, web pages...
And each time I do apt-get, I get :
Code:perl: warning: Please check that your locale settings: LANGUAGE = "fr", LC_ALL = "FR_fr", LANG = "fr" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). install/a2ps: Handling install for emacsen flavor emacs21 Symbol's function definition is void: debian-startup emacs-package-install: /usr/lib/emacsen-common/packages/install/a2ps emacs21 emacs21 failed at /usr/lib/emacsen-common/emacs-package-install line 30, <TSORT> line 1. dpkg: error processing a2ps (--configure): subprocess post-installation script returned error exit status 29 Errors were encountered while processing: a2ps E: Sub-process /usr/bin/dpkg returned an error code (1)
Here is my usbview :
USB UHCI Root Hub
- USB MFP
Code:USB MFP Manufacturer: EPSON Serial Number: RE0100308111544540 Speed: 12Mb/s (full) USB Version: 1.10 Device Class: 00(>ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 04b8 Product Id: 0808 Revision Number: 1.00 Config Number: 1 Number of Interfaces: 2 Attributes: c0 MaxPower Needed: 2mA Interface Number: 0 Name: (none) Alternate Number: 0 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 2 Endpoint Address: 81 Direction: in Attribute: 2 Type: Bulk Max Packet Size: 64 Interval: 0ms Endpoint Address: 02 Direction: out Attribute: 2 Type: Bulk Max Packet Size: 64 Interval: 0ms Interface Number: 1 Name: usblp Alternate Number: 0 Class: 07(print) Sub Class: 1 Protocol: 2 Number of Endpoints: 2 Endpoint Address: 04 Direction: out Attribute: 2 Type: Bulk Max Packet Size: 64 Interval: 0ms Endpoint Address: 83 Direction: in Attribute: 2 Type: Bulk Max Packet Size: 64 Interval: 0ms
Thanks for helping,
TOM.
If you still haven't gotten the cx5400 scanner to work, you should check out the user notes at http://www.linuxprinting.org/show_pr...-Stylus_CX5200
Let me know if this woks for you!
Hello,
I've bought the Epson CX 5400 two days ago, and I've found a simple way to make it work, so I hope it will help :
Install the last version of sane (and related packages).
Then go to http://www.epkowa.co.jp/english/linux_e/lsd_e.html or directly to http://www.epkowa.co.jp/english/linux_e/DL1_scan_e.html
and download the last drivers from epson. Don't worry about the selection of model, you can choose any scanner model because the driver downloaded is the same. Install that driver.
You've done the most difficult part.
Now :
:> modprobe scanner vendor=0x04b8 product=0x0808
and now it works :
launch xsane and enjoy.
To make the module loaded at boot time edit
/etc/module.conf and add theses lines
alias /dev/usb/scanner0 scanner
options scanner vendor=0x04b8 product=0x0808
I hope this will help.
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco WS-C4500X-24X-IPB 4500-X 24P RJ45 10Gbps GE IP Base Switch 1 Year Warranty
$385.00
Cisco IE-3000-8TC Industrial Ethernet 8 Ports Managed Switch 1 Year Warranty
$114.00
Cisco WS-C4948-10GE-S Catalyst 4900 Series Layer4 Managed Switch 1 Year Warranty
$115.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco WS-C4948-10GE-S 4948-10GE 48 Port Gigabit +10GB Switch w single AC 15.0 OS
$99.99
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch
$41.64