I had the same problem with a 3c509 NIC.
I found out that it was solved by typingin the rootshell (K -> knoppix -> rootshell)Code:modprobe 3c509
I would suggest you try
SuccesCode:modprobe 3c900
hi,
I just installed knoppix and I'm quite happy the X server works 'cause I wasn't able to make it run with a normal debian installation but now I have another problem. My 3c900b-TPO network card isn't recognized by knoppix (I think it's something with the kernel because when I installed Debian with the 2.4 kernel it didn't work neither (with the 2.2 kernel it worked immediatly...)).
I found a driver on the net that should be able to fix this problem but I can't get it installed. (http://www.scyld.com/network/vortex.html)
I had to make some changes because of depricated code in the source something about holloc.h (halloc.h??) and slab.h or something like that. The compiling of the driver went fine but when I want to install it I get this message:
does someone know how to fix this...I really want to go on the net with my knoppix installation...Code:root@frost:~/3com/3c90x-102# insmod /root/3com/3c90x-102/3c90x.o media_select=7 Warning: loading /root/3com/3c90x-102/3c90x.o will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules /root/3com/3c90x-102/3c90x.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
thx,
Frost
I had the same problem with a 3c509 NIC.
I found out that it was solved by typingin the rootshell (K -> knoppix -> rootshell)Code:modprobe 3c509
I would suggest you try
SuccesCode:modprobe 3c900
I think I tried that already. I got an error like no such file or something like that. I'm now not able to boot in Linux to try it 'cause when I boot in it I can't resist trying everything and I have exams tomorrow . I'll try it again tomorrow, but like I said I think I already did that.
And why should an old kernel support my card without any problems and a new kernel not? Verry strange...but anyway...I'm back to my books...
c ya,
Frost
Well, every module needs space on the CD. If it's not in the kernel it takes a littlebit less space. In Knoppix space is limited. So perhaps for that reason.
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
Cisco C9300NM8X Network Switch Module 8 X 10GE
$297.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router
$39.99
Lot of 10 Cisco Meraki MS220-8P-HW 8 Port Desktop Ethernet Switch - UNCLAIMED
$416.95