Try the command "sndconfig" to make sound work.
Hello,
1. There seems to be no sound in my Knoppix OS. I am using Knoppix via the LIVE CD. I have Intel 810 sound card.
2. Refresh rate - How do I change my desktop resolution to 800 x 600, 85 Hz? [Windows supports this mode]
Thanks
Aravind
Try the command "sndconfig" to make sound work.
Hi,
Thanks for the message.
I enabled the sound by going to Command Center->Sound->Enable sound on startup->Apply->yes.
Any idea on the refresh rate / resolution?
Aravind S
No, sorry. Not my area of expertise.
Have you tried in the same Control Center as you set up sound in?2. Refresh rate - How do I change my desktop resolution to 800 x 600, 85 Hz? [Windows supports this mode]
Under Peripherals - X Display
A bit harder in: /etc/X11/XF86Config-4
or by running: XFree86 -configure
Markus
Thanks for the reply, Mark.
The solution seems to be to enter 'Knoppix screen=800x600 xvrefresh=85'
[Without quotes] at the boot prompt.
I should have read the documentation more, I guess. I found this when I pressed 'F2' [Cheats] while the Knoppix screen is displayed for the first time while booting.
I hope I didn't cause any inconvenience.
Aravind S
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.49
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99
Seagate Barracuda ST3000DM001 3TB 7200 RPM 64MB 6.0Gbs SATA 3.5" Internal HDD
$25.89