Try the command "sndconfig" to make sound work.
Hello,
1. There seems to be no sound in my Knoppix OS. I am using Knoppix via the LIVE CD. I have Intel 810 sound card.
2. Refresh rate - How do I change my desktop resolution to 800 x 600, 85 Hz? [Windows supports this mode]
Thanks
Aravind
Try the command "sndconfig" to make sound work.
Hi,
Thanks for the message.
I enabled the sound by going to Command Center->Sound->Enable sound on startup->Apply->yes.
Any idea on the refresh rate / resolution?
Aravind S
No, sorry. Not my area of expertise.
Have you tried in the same Control Center as you set up sound in?2. Refresh rate - How do I change my desktop resolution to 800 x 600, 85 Hz? [Windows supports this mode]
Under Peripherals - X Display
A bit harder in: /etc/X11/XF86Config-4
or by running: XFree86 -configure
Markus
Thanks for the reply, Mark.
The solution seems to be to enter 'Knoppix screen=800x600 xvrefresh=85'
[Without quotes] at the boot prompt.
I should have read the documentation more, I guess. I found this when I pressed 'F2' [Cheats] while the Knoppix screen is displayed for the first time while booting.
I hope I didn't cause any inconvenience.
Aravind S
HPGYT DELL 960GB SATA 6Gb/s 2.5in Internal SSD 0HPGYT MTFDDAK960TCB
$59.00
G5T03 Dell Intel DC S3700 Series 800GB SATA 6Gb/s 2.5" SSD 0G5T03 SSDSC2BA800G3E
$55.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
M.2 NVME SATA SSD Enclosure USB 3.2 Gen 2 10Gbps for M-Key or M+B Key SSD to 8TB
$40.86
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Micron 5100 MAX 120GB SATA 6Gb/s 2.5" Internal SSD MTFDDAK120TCC Solid State
$9.99
Intel DC S3510 Series 120GB SSD 2.5" 6Gb/s SATA Solid State Drive SSDSC2BB120G6K
$9.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$198.99
Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5" SATA III 6GB/s for PC/MAC Lot
$188.09