-
Senior Member
registered user
KDE 3.1 is in woody has ne1 tried it?
topic pretty much says it all ...
I'm was wanting to go to kde 3.1 but it's only out for the stable (woody) branch. I was wondering if anyone has tried it, and their success rate?? I have a dial-up so I don't want to mess things up trying something new and end up spend most of a day upgrading then removing and reinstalling 3.04, so ...
TIA
rock
-
yes--works, but has a few problems
Hi,
Yes, I just installed Knoppix on my laptop and immediately updated to KDE 3.1 (I hated the lack of tabbed browsing in konquerer =).
I had a few problems with it erroring out because of overwriting issues, all of which were solved with either:
dpkg --force configure -i /var/cache/apt/archives/<package name>
or
dpkg --force overwrite -i /var/cache/apt/archives/<package name>
depending on what the error was. once this is done, return to the install with apt-get -f install and then apt-get dist-upgrade when until the dist-upgrade no longer does anything. It took me a while, although it downloaded everything first and then did it all from disk when I was having problems.
Jeff
-
Senior Member
registered user
Thanks I am using Konqueror in KDE 3.1 from my knoppix box to post this "Thank you"! Without your help with the dpkg --force overwrite -i filename I wouldn't be using it right now!!
I couldn't get the dpkg --force configure -i ...to work so I used dpkg --force overwrite -i ...and then dpkg --configure -a.
Thanks a bunch, I have some font problems but I still have a bunch of files that need to be upgraded, I used apt-get intall kdebase to get started, and now I need to get everything up to KDE 3.1.
BTW on my system by just upgrading kdebase Helmet was about the only readable font, almost everything else was a hard to read script font, but all should be well tomorrow morning after an apt-get upgrade.
Thanks again,
rock
-
Detailed Explanation Needed
Please explain in detail...what you do to update to kde3.1 after the knx-hdinstall script has completed.
Do you need to edit your /etc/apt/sources.list
Is it apt-get update
apt-get upgrade
apt-get dist-upgrade
....
Thanks...
-
hi!
just trying to do the same,
why do i need dist-upgrade?
what is it exaclty doing?
thanks,
jonatan
-
Member
registered user
-
Senior Member
registered user
You have to edit your sources.list to get the debs from a kde woody mirror, www.apt-get.org is a good source for finding URI's for sources.list.
Be advised, there is quite a bit of manual intervention required to get the woody kde 3.1 debs working in Knoppix 3.1. You will have about 10 or so files that refuse to install, without forcing them to overwrite, on my computer I probably spent at least an hour (maybe almost 2) messing around getting things to install, if you can't get everything to install you'll have part 3.1 and part 3.04 (a mess).
What I did was apt-get install kdebase from a kde mirror then forced the install for each package that had overwrite errors using the dpkg --force overwrite ???? for each file that had install errors. Then you need to apt-get dist-upgrade to get the rest of the necessary packages. dist-upgrade will get any necessary packages that are needed when going from one version to another such as libraries etc.
Note: at this time my fonts are still all messed up and I only have two or three usable fonts in my knoppix install, on my woody based system at work KDE 3.1 installed perfectly and works fine (woody packages on a woody system).
rock
-
I just installed some kde 3.1 .debs, now my problem is i cannot start kde.
i am using gdm2, and it was using a default session, which brought up kde ..
i used gnome while updating my system to kde 3.1, now the session has gone ![Sad](images/smilies/icon_sad.gif)
where should i add my kde session?
thanks for the help,
jonatan
-
Senior Member
registered user
Hello,
Your gdm sessions should be in /etc/gdm/Sessions sometimes I've had problems with gdm not using a link ie. KDE is usually a link in /etc/gdm/Sessions to /etc/kde3/debian/KDE-gdm-session so I've copied the KDE-gdm-session file over to the gdm/Sessions directory and renamed it KDE. Then you may have to reconfigure gdm to use the new KDE session. On my system since the upgrade, I think "debian" is my gdm KDE session.
HTH
rock
-
Junior Member
registered user
My adventures w/ Knoppix -> HDD & getting KDE 3.1 ins
http://www.northern.ca/forums/msg.php?th=44
most of my config important files are on there too for your refrence....
KDE 3.1 is nice....
Similar Threads
-
By witkey in forum General Support
Replies: 7
Last Post: 01-14-2005, 06:22 AM
-
By pc3 in forum General Support
Replies: 0
Last Post: 02-28-2004, 05:47 PM
-
By rafiks in forum General Support
Replies: 3
Last Post: 11-17-2003, 06:39 PM
-
By mr_dellarenta in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-11-2003, 05:19 AM
-
By HalVaughan in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 01-06-2003, 09:01 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45 picture](/store/img/g/psQAAOSwaY9ki5PI/s-l225/DELL-PowerEdge-R730XD-Server-2x-E5-2680v3-2-5GHz-2.jpg)
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$267.00
![DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture](/store/img/g/1hMAAOSw8hVl8bKq/s-l225/DELL-PowerEdge-R430-8SFF-2x-E5-2680v4-2-4GHz-28-Co.jpg)
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
![Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture](/store/img/g/vx0AAOSwvwFlExVY/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2680-V4-28-Cores-.jpg)
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
![Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture](/store/img/g/CdkAAOSwY0BmYMoF/s-l225/Dell-Poweredge-R730xd-LFF-14-Bay-2U-Server-Choose-.jpg)
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD  picture](/store/img/g/yAwAAOSwdyNlgQ8d/s-l225/Dell-PowerEdge-R720xd-26HDD-300gb-2-5-inch-E5-2697.jpg)
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
![SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture](/store/img/g/MFoAAOSwQYhmavYc/s-l225/SuperMicro-Server-505-2-Intel-Atom-2-4GHz-8GB-RAM-.jpg)
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$224.99
![Gigabyte 2U Server 2x E5-2698 v3 128gb 12x 3.5 12G 9362-8i 14x Trays Rails picture](/store/img/g/uVcAAOSwWSZmKXdt/s-l225/Gigabyte-2U-Server-2x-E5-2698-v3-128gb-12x-3-5-12G.jpg)
Gigabyte 2U Server 2x E5-2698 v3 128gb 12x 3.5 12G 9362-8i 14x Trays Rails
$394.99
![Dell Poweredge R420 3.5](/store/img/g/A0IAAOSwHTJmM-wg/s-l225/Dell-Poweredge-R420-3-5-2x-Xeon-E5-2430-2-2ghz-12-.jpg)
Dell Poweredge R420 3.5" 2x Xeon E5-2430 2.2ghz 12-Cores 24gb 2x 1TB 2x 550w
$169.99