Hello,
I have used also older versions of knoppix which worked correctly, but i became aware of problems with my graphics-card when i tried to run knoppix 3.3. With the 2 versions from 24-09 and the one from 03-11 i had the same problem ... In expert mode i did see it recognized my card correctly as a ati rage128 compatible but the xserver can't start, after it tries to start it seems to crash directly again and am i in console mode again. After a while it tries out other xservers but those also fail till the last x-server just plainly crashes and i can't use X at all
... in fact i have an "ati xpert 2000" card.
Are there maybe boot options i can try to make knoppix 3.3 run also on my system ? ... Or do i have to get a newer graphics card?
i also run a normal Debian unstable on my HD and in here i have no problems with X ... But this is Xfree86 4.2 i believe
thanx
Richard
Western Digital WD140EDGZ 14 TB, Internal, 5400 RPM, 3.5 inch Hard Drive
$99.00
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.41