I booted it back up the next day and now it works fine. Don't know what the problem was. I'll see what happens next time.![]()
I have a Prism 2.5 chip in an IBM Thinkpad T23. Knoppix seems to recognize this mini-PCI card and loads the appropriate driver and gives me a eth0 device. I run wlcardconfig (or iwconfig), enter the correct settings and everthing appears to be ok. I then run 'wavemon' and I seem to have a good connection to my AP. The problem is that it's not grabbing an ip from my router. When I run 'pump -i eth0' it comes back with 'operation failed'. Everything that I have read says to use pump to initiate dhcp. What am I missing here? BTW, my 10/100 lan card on the same laptop (configured as eth1) grabs an ip right away.
Also, I still can't seem to get WEP to work. I've read all the posts on this website about WEP setup and I've tried it all but the only thing that seems to work is disabling WEP on my AP. Is there anything special for this Prism 2.5 chip?
If you have any suggestions please respond. Thanks!
I booted it back up the next day and now it works fine. Don't know what the problem was. I'll see what happens next time.![]()
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$267.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
DELL PowerEdge R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$323.00