Erik,
I have a SMC card to. It seems it's not supported. So I replaced it for a 3C509.
I could find that card-driver
I have an SMC EtherEZ ISA card, which works fine under gentoo and Mandrake, but for some reason simply does not want to load under the latest knoppix (haven't tried earlier versions).
Under gentoo (on the same box) the card is using io=0x300 irq=10, under Knoppix, it isn't detected and when I try to modprobe it directly with the same parameters (and just about all other valid ones) it doesn't load and gives the "No such device or address" message.
basically, i'm just doing "modprobe smc-ultra io=0x300 irq=10" from the root command shell.
Anyone have any ideas?
Erik,
I have a SMC card to. It seems it's not supported. So I replaced it for a 3C509.
I could find that card-driver
Dell PowerEdge C6320 82F9M Server Blade Module 10gb SFP+ 082F9M
$79.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$79.00
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Cisco UCSB-B200-M5 V05 Blade Server with 2x GOLD 6146, 3.2GHZ 64GB RAM, NO SSD
$679.00
DELL POWEREDGE FC640 Blade Server FX2 CTO Barebones iDrac Enterprise Warranty
$199.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v3 2.6GHz =24 Cores 128GB P246 650FLB
$265.00