-
udma4
I have:
Asus A7V333 (no raid, no nic, onboard-sound-disabled)
Athlon -XP1800
Fujitsu MP3204AT
Quantum Fireball CX
80 Pin cable
My problem is that I can only get the drive to go into udma-2. When I set the drive in udma-3/4 or 5, I get errors from the drive using tail -f /var/log/messages and a warning from hdparm that the modes 3/4/5 are not supported.
The bios on the mother board reports the drives as udma 5 and the other drive I have (Quantum) as udma 4. It reports the bus speed as 266...but I know that even winblows runs faster on my machine. I like knoppix, and I'm gonna keep it even if I can't get udma 3+ but if I can, I'd like to take advantage of my hardware.
Does anyone know how to enable udma modes higher than 2 in knoppix?
Thanks,
John
-
Senior Member
registered user
Fujitsu MP3204AT and UDMA
<snip>
Fujitsu MP3204AT ... My problem is that I can only get the drive to go into udma-2...
</snip>
That's because UDMA-2 (UDMA-33) is the fastest mode supported by that drive, according to a Google search. From the age of the drive, that's likely.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Intel Core i7-7700 3.60GHz Quad-Core CPU
$38.87
AMD Ryzen 9 7900X3D Gaming Processor - 12 Core And 24 Threads - 5.60 GHz Max Boo
$449.00
AMD Ryzen 5 5600X 6-core 12-Thread Desktop Processor AVZ9
$104.99
Intel - Core i5-14600K 14th Gen 14-Core 20-Thread - 4.0GHz (5.3GHz Turbo) Soc...
$306.99
Intel Core 2 Quad Processor Q9550 2.83GHz 1333MHz (SLB8V)
$12.50
AMD Ryzen 5 7600x Processor (5.3 GHz, 6 Cores, LGA 1718/Socket AM5) NEW OEM Tray
$169.98
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.97
Intel Xeon E5-2697A v4 SR2K1 2.60GHz 40MB 16-Core LGA2011-3 CPU Processor
$39.99
AMD Ryzen 5 7600 Processor (5.1 GHz, 6 Cores, Socket AM5) -...
$160.00
Intel Core i5-13600K - 13th Gen Raptor Lake 14-Core (6P+8E) 3.5GHz LGA CPU
$259.99