Results 1 to 6 of 6

Thread: Knoppix accessing HDD for swap space??

  1. #1
    Junior Member
    Join Date
    Nov 2003
    Posts
    15

    Knoppix accessing HDD for swap space??

    I've been noticing that whenever Konqueror starts Java, or whenever I run Mozilla at all, the hard drive access light starts flashing. I am running it on an old PC, K6-2/400 with 128Mb of memory, so I wouldn't be surprised if it is running out of memory, but still. . . .

    Is Konqueror using the hard drive for swap space? If so, how can it be safe??

  2. #2
    Member registered user
    Join Date
    Oct 2003
    Posts
    80
    Do you have knoppix installed or running from CD? Linux uses the hard drive for swap space. You should have a dedicated linux swap partition on a hard drive. Windows basically does the same but it calls it "virtual memory" and can be specified as well. This is not a new concept. It may be new to the casual windows user who has never broken from the microsoft mold but power users are very familiar. Oh and swap space is safe and frees up memory for other tasks. Hope this helps

  3. #3
    Junior Member
    Join Date
    Nov 2003
    Posts
    15
    Ok, I see that I didn't provide nearly enough information. My bad. I probably should have mentioned that I have an MSCS, did systems programming on IBM mainframes to pay my way through grad school, and have done a sh*tload of application programming on UNIX (and Linux) systems for the last twenty years. My thesis was on RAID, which was a new and hot topic back in the early 1980's. Now that we've established that I am not a totally clueless luser. . . .

    I am running Knoppix 3.3 from CD. It is being run on an older machine that has Win98SE installed. The hard drive doesn't -- repeat does NOT -- have a separate Linux swap partition on it. It has two FAT32 partitions, both of which are filled with my files and programs. "Filled", as in, there's about 50Mb left, just barely enough to boot Win98SE.

    The partitions aren't mounted. Knoppix obviously detects that they exist, but it shouldn't be writing to them or even reading them.

    Which is why it is so unnerving to me to see the drive-access light flashing. Knoppix isn't installed on the HD, it doesn't have a swap partition, and the partitions aren't mounted, so: is it using swap space on the drive despite all that? With the access light flashing like mad, I am more than a little concerned that Knoppix is merrily overwriting my data.

  4. #4
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Auckland, New Zealand
    Posts
    818
    There is also an option to have a swap file on a fat32 partition when you boot up.. I think that if you have under 96megs of ram it will ask if you want to make a swap file.

  5. #5
    Junior Member
    Join Date
    Nov 2003
    Posts
    15
    Thanks, Eadz; this machine has 128Mb, and Knoppix never asked -- I guess I just have to hope it's only writing to the empty spots. :-/

    Oh well. Gonna get an Asus Terminator (hopefully the T2 if they release one for the Athlon -- has an AGP slot) soon, then I can just install Linux permanently.

  6. #6
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    Are you sure its not cdrom drive access lights you're seeing?

    Regards,

Similar Threads

  1. 3.8.x toram causes crash when utilising swap space
    By cleary in forum Hardware & Booting
    Replies: 0
    Last Post: 04-18-2005, 07:35 AM
  2. Accessing Windows Registry Through Knoppix
    By kaplan71 in forum MS Windows & New to Linux
    Replies: 5
    Last Post: 02-24-2005, 10:09 AM
  3. Encrpyiotn with Knoppix (Kernel and/or User Space)
    By ChaosKCW in forum General Support
    Replies: 1
    Last Post: 03-25-2004, 06:13 PM
  4. How to force swap space on HD not to mount ?
    By cwee005 in forum Tips and Tricks
    Replies: 1
    Last Post: 11-10-2003, 11:21 PM
  5. USB Thumb drive as swap space?
    By iconfly in forum General Support
    Replies: 3
    Last Post: 05-29-2003, 09:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module picture

Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module

$24.99



Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module picture

Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module

$17.99



Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module picture

Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module

$83.99



Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,  picture

Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,

$54.00



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC picture

Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC

$13.89



Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm picture

Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm

$23.99



SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02 picture

SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02

$5.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00