I´m not sure but knoppix partition is xfs after installing knoppix to hard disk and it may be the problem here.
is it knoppix kernel source for download at any place? in order to be able recompiling the ´original´ source.
It is not at /usr/src/
Hi,
I use knoppix to install debian on my machines.
On my laptop i wanted to use gatos (gatos.sourceforge.net) to get Xv and DRI working on the internal ATI-mach 64 videocard. However, to be able to insmod the mach64.o module I need cmpxchg in the kernel and the stock knoppix kernel doesn't have it enabled. So I wend about to compile my own kernel. I did the following:
apt-get install kernel-source-2.4.20
cd /usr/src
tar -xjf kernel-sources.2.4.20.tar.bz2
cd kernel-source-2.4.20
make xconfig
changed CPU-architecture to Pentium-III (for cmpxchg)
make-kpkg clean
make-kpkg --initrd --revision=custom.1.0 kernel_image
dpkg -i dpkg -i kernel-image-2.4.20_custom.1.0_i386.deb
Then I changed /etc/lilo.conf to point to the new kernel.
I reran lilo and rebooted.
I chose my new kernel.
The new kernel can't mount the root partition (reiserfs).
I've tried about everythin I can think of but I can't seem to get a working kernel that is able to mount the root partition.
Please help.
I´m not sure but knoppix partition is xfs after installing knoppix to hard disk and it may be the problem here.
is it knoppix kernel source for download at any place? in order to be able recompiling the ´original´ source.
It is not at /usr/src/
When I did a HDD install, I chose for reiserfs, I saw a reiser filesystem being made for the root partition. The new kernel is compiled with reiserfs support.
yes, but when i did hdd install i chose for ext3 but partition is xfs actually. I have debian in other partition whose kernel is compiled with ext3 support and without xfs support. If i run e2fsck on knoppix i get error 'system file not supported get a e2fsck new version'Originally Posted by hopman
Partition Magic 8 recognizes ext3 parttions but it knows anything about knoppix partition.
yes, but when i did hdd install i chose for ext3 but partition is xfs actually. I have debian in other partition whose kernel is compiled with ext3 support and without xfs support. If i run e2fsck on knoppix i get error 'system file not supported get a e2fsck new version'Originally Posted by hopman
Partition Magic 8 recognizes ext3 parttions but it knows anything about knoppix partition.
I tried fsck.reiserfs but it can't be run on a read/write mount and I can't remount root (/) because it is busy
However, I did find this in dmesg (line numbers added by me):
01. RAMDISK: Compressed image found at block 0
02. Freeing initrd memory: 166k freed
03. VFS: Mounted root (ext2 filesystem).
04. FAT: bogus logical sector size 0
05. FAT: bogus logical sector size 0
06. reiserfs: checking transaction log (device 03:02) ...
07. Using r5 hash to sort names
08. ReiserFS version 3.6.25
09. VFS: Mounted root (reiserfs filesystem) readonly.
10. Trying to move old root to /initrd ... okay
It looks to like /dev/hda2 (my root partition) is mounted as a reiserfs (lines 06-09), but what happens before that (line 03) ? It looks like something is mounted as root with a ext2 filesystem and then remounted as /initrd. Is initrd.img mounted as root first ? And if so could that be interfering with the new kernel ??
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$161.99
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00