-
READ-ONLY
HELLO,
I have the last one knoppix release, i had set persistant home on my hd /dev/hdb1 and i have saved my configuration.
I start knoppix with this command:
Knoopix home=/dev/hdb1 myconfig=/dev/hdb1
I try to use Modem Rockwell 56k, but it says Unable to open modem
I read on HELP that i have to change permission of KPPP
I do it, BUT IT SAY THAT MY FILESYSTEM IS READ ONLY!!
I THINK IT USE RAMDISK!! HOW I CAN USE MY MODEM?
THANKS A LOT
-
Senior Member
registered user
Re: READ-ONLY
--Try using wvdial instead:
as root:
' wvdialconf /etc/wvdial.conf '
Then edit /etc/wvdial.conf and put in your ISP information. You may also have to edit /etc/ppp/pap-secrets or chap-secrets for your ID and password.
--To dial out, ' sudo wvdial '.
--I have found that even tho wvdial has a clunkier interface, in general it's more reliable than kppp. However, if wvdialconf can't find your modem then it's likely a WINmodem, and will only work under Windows.
Originally Posted by
lello107
HELLO,
I have the last one knoppix release, i had set persistant home on my hd /dev/hdb1 and i have saved my configuration.
I start knoppix with this command:
Knoopix home=/dev/hdb1 myconfig=/dev/hdb1
I try to use Modem Rockwell 56k, but it says Unable to open modem
I read on HELP that i have to change permission of KPPP
I do it, BUT IT SAY THAT MY FILESYSTEM IS READ ONLY!!
I THINK IT USE RAMDISK!! HOW I CAN USE MY MODEM?
THANKS A LOT
-
Senior Member
registered user
If the modem is a winmodem, some have drivers for linux, and there are posts in this forum telling how to get them working in knoppix.
A Rockwell may have a conexant chipset.
Similar Threads
-
By Jameson in forum General Support
Replies: 3
Last Post: 05-07-2005, 10:40 PM
-
By namelessservant in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 12-18-2004, 02:56 AM
-
By Needtoknow in forum Hdd Install / Debian / Apt
Replies: 10
Last Post: 10-22-2004, 02:27 AM
-
By Macrob in forum Hdd Install / Debian / Apt
Replies: 9
Last Post: 07-27-2004, 10:44 AM
-
By Keilaron in forum Hardware & Booting
Replies: 3
Last Post: 01-23-2004, 04:56 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00