rawrite2 -f boot-en.img -d A
I would assume replacing "A" with the CD burner might work
question would be
when booting to Knoppix, does it need write access?
If it does, then it wouldn't work
Will run a test this evening
Is it possible to make a boot CD that will act exactly like the boot floppy made with mkfloppy.bat on the Knoppix CD? I tried it but even when I changed the BIOS to boot from CD, it booted Win98 from the hard drive. I am running Knoppix off the hard drive and want to leave my config floppy in the floppy drive.
rawrite2 -f boot-en.img -d A
I would assume replacing "A" with the CD burner might work
question would be
when booting to Knoppix, does it need write access?
If it does, then it wouldn't work
Will run a test this evening
Oops! I forget to choose "make CD bootable" when making the CD. I'll try that tonight.
I tried making a boot CD from the boot floppy and couldn't. In Nero and EZ CD Creator, you can choose 'make bootable CD' but when the program looks at the floppy as the source it says it isn't bootable. I also tried making an ISO 9660 CD with all the floppy files on it but that didn't work either. There must be a way...
You don't need to - and you should not "make CD bootlable"!Originally Posted by boehmb
The KNOPPIX.iso file is already an image of a bootable CD.
Just use in nero the function: Burn iso image ...
And you will get a bootable CD rom.
tom
Tuxtom, thanks for your reply. But I have the Knoppix CD and it works great. I'm trying to make a boot CD from the boot floppy. I have the Knoppix files on my hard drive, but use a boot floppy to access them. I wanted to make a boot CD and just leave it in my second CD-ROM drive so the computer boots to Knoppix by default (as long as the boot CD is in). I use the floppy for my Knoppix config. If I can't do it, it's OK, I just wondered if there was a way.....
I think I understand....Originally Posted by boehmb
Check these things :
* your harddrive with KNOPPIX on is not ntfs
* you have a directory called "KNOPPIX" either in / (root ) so /KNOPPIX for linux filesystems, or C:\KNOPPIX for fat32 filesystems
* you have the really big KNOPPIX file in /KNOPPIX/ or C:\KNOPPIX
i.e. you have C:\KNOPPIX\KNOPPIX
You can use the standard knoppix cd to boot from, if you have those files above, it will search the harddrive before the cdrom, and use those.
it will say "accessing CDROM in /dev/hda1" or similar if your partition is /dev/hda1
I tried to extract the image using isobuster but I can'tOriginally Posted by tuxtom
let me try and figure how to extract the img and burn the contents to a CD
Put the cd in the drive.. and drag the files across?Originally Posted by Sucker
( once you've burned the knoppix cd. using "burn image" from the file menu of nero )
Knoppix.iso burned to a CD
Copied the contents of the CD to my hard disk
Fireup Nero to burn an image of boot-en.img to CD
Results?
=a brand new coaster
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Cisco 1100 Terminal - gateway - rack-mountable C1100TGX-1N24P32A
$1349.00
Cisco IP Phone 6841 – CP-6841-3PW-NA-K9=
$75.00
Cisco RV340W 1000Mbps Dual WAN Gigabit VPN Wireless AC Router RV340W-A-K9-NA
$183.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
CISCO ASR-920-24SZ-M ASR920 w/ ASR920-24G-4-10G lic 2x DC PSU
$249.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
UNCLAIMED Cisco Meraki MS120-24P-HW - 24Ports Ethernet PoE Switch Same Day Ship
$315.00