-
Dual boot with WinXP, one physical disk on Promise RAID
Hi guys,
I have tried the hard disk install a few times with no success, I have a single 40GB hard disk on a Promise RAID controller built into my motherboard. I have WinXP on a 10GB NTFS partition, a 20GB FAT32 partition for files and then two ext3 partitions and a ext2 swap partition on the remaining space (this was done for me by Mandrake 9.1). Previously I had no problem dual booting WinXP and Mandrake (was done automatically by the mandrake installer).
I ran the knoppix-installer and let it write LILO to the MBR, it installed into the larger of the ext3 partitions. I didn't make a boot disk, and on resetting the computer couldn't boot either WinXP or Knoppix, just got half my screens filled by the character 9. I used a win2000 cd to fix the boot and mbr, allowing me to boot into winXP, but not knoppix.
I then repeated the knoppix install, this time telling it to write lilo to the root partition and make a boot floppy. This time I could boot into winXP (without the floppy) but not into knoppix (just got an error message saying that the floppy wasn't a boot disk).
I tried to use GAG, which can boot into winXP, but won't let me boot into Knoppix, just says that the partition isn't valid or something.
Please can someone help, I had trouble burning the CD on my CD writer (which is quite old) using Nero6 (got some error messages at the end and the disk wouldn't eject) but knoppix still boots from the CD (so I thought that the burn must have been successful anyway).
Could someone help please? I really like the look of knoppix, and wanted to install it because I wanted a debian OS, am I doing something wrong, or is it a problem with the CD (I have tried to burn it several time and always had the same problem).
Grateful thanks in anticipation of any help
Ceri
-
Maybe a problem with NTFS
Hello, the problem you have could be because of the NTFS file system. I have Windows Me. Windows XP and Koppix in my computer and there is no problem because lilo is installed in the Me partition, and there I select Me or XP. I had some problems trying to start Xp from lilo, so you could make a small partition with Ms-DOS and then reinstall the MBR for XP selecting dual boot to MS-DOS and Xp and then, install knoppix (or reinstall lilo) and the MBR in the dos partition, it may run but you have to select your Xp two times.
Try, it's a little annoying but it works in mine.
Similar Threads
-
By hukdonfonix in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 12-04-2004, 06:39 PM
-
By hitcher in forum Hardware & Booting
Replies: 0
Last Post: 02-14-2004, 08:29 AM
-
By Wil in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 11-27-2003, 02:42 AM
-
By academic in forum General Support
Replies: 2
Last Post: 09-09-2003, 09:31 PM
-
By A.T.O.B in forum Hdd Install / Debian / Apt
Replies: 20
Last Post: 06-27-2003, 03:48 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Broadcom LSI 9400-8i Raid card SAS/SATA/NVME SFF-8643 SAS3408 PCIe 3.1 x8
$112.63
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99