Does anyone have a copy of http://www.knoppix.net/docs/index.php/PivotRootInstall -- can't currently get to that page as the wiki software is still being upgraded...
Yes, the X configuration will remain the same on the HD install.Originally Posted by daneel101
What you have to do is delete /etc/X11/XF86config-4 then run mkxf86config to create a new one based on the hardware the system detects. Must be done before starting X, of course. mkxf86config does run as part of the autoconfig startup but it will only create a new xf86config file if there is none existing.
Does anyone have a copy of http://www.knoppix.net/docs/index.php/PivotRootInstall -- can't currently get to that page as the wiki software is still being upgraded...
Thank you very much. It works fine.
there is only one problem: When the system shuts down I get a bunch of hd errors. I think it's because the system unmounts the usb hdd before it completely shuts down. Is there any way to fix this?
I suppose there is a simpler soultion to botting knoppix from CD.
In this case i had Rh7.2 installed first, and didn't want to spoil my MBR, like you.
So i did the following:
1) Make lilo boot floppy (which u couldn't)
2) Turned it into a CD. I dont really trust floppies......
3) whenever i boot, even if i have removed Rh 7.2 from the hdd, and put DamnSmallLinux, whcih i have done now..... Lilo still loads DSl if i type "Linux" at boot........... Isn't that a simpler way to do that?
Install your linux on a removable drive, and then mklilo from the same thing........ That worked for me. I guess linux acutally means to experiment for yourself.....
To boot a Knoppix HD install from the CD boot the CD with the cheatcode:(replace hda5 with the correct partition for your HD install) but I don't know if it will work with a usbdrive.Code:knoppix root=/dev/hda5 noinitrd ro
Using Knoppix CD 3.8.2 I've made a begginer install to a USBEHD partition /dev/uba4 (not bootable with my BIOS) and everything except read access to the initiating cdrom works fine.
I have a cdrom and a cdrw on the second IDE channel and they are correctly recognized by knoppix as /dev/hd[c,d]. With autofs active cdrom1 = /dev/hdd works fine. cdrom = /dev/hdc gives blank reads and the physical eject button on the drive is locked.
As root 'eject' will open the cdrom tray (actually it's the -s option that works not the -r option) but read and button lock problems persist.
'fuser -v /mnt/cdrom' shows there is a kernel process keeping the "device is busy" from /mnt/old_root/cdrom
This persists even after the bood cd is ejected and removed. I presume the mount /proc /proc -t proc command is responsible for reintroducing this "busy cdrom" from the RAM based root to the uba4 based root following the pivot_root exchange.
I've tried to discover a pid for this process to try to kill it, but with no success. I've also tried the option 'mount /proc /proc -t proc,noisso9660 to avoid mounting the above access.
Anyhelp would be appreciated. This problem should be addressed in the pivot_root instructions.
See Woes Using CDs
http://www.knoppix.net/forum/viewtop...r=asc&start=10
CrashedAgain,
FYI, You might be interested to know your excellent method of:
knoppix root=/dev/hda5 noinitrd ro
to boot to a full HD install also works with Loadlin.exe in a DOS batch file.
Loadlin is nice because it is very easy to use.
Use the same method of booting as with a Poor Man's Install with appropriate copying of Knoppix image files to the HD using whatever kernel you want (2.4 or 2.6) etc.
They uncompress and with your method, the full HD install boots up.
See docs on Poor Man's Install for full what to copy to a HD partition.
This is how I'm booting my setup now. First up comes the menu from Boot.ini. (I use XP on a FAT32 partition)
I select the line: "Boot to DOS or Linux." This starts a batch file that asks, "Do you wish to boot to Linux?"
If I press "Y" this calls another batch file to start Loadlin which starts uncompressing files from the CD, my Knoppix setup (with cheatcodes in place) starts up.
If I press "N", the computer goes to DOS.
So, you can skip the CD if you want as long the appropriate files are copied to a partition to your HD and Loadlin activates them.
As I said, see Poor Man's Install Docs for anyone who wants to try this. Similar method, but for a true full HD as well with your tip.
sakiZ
Variations of Poor Mans Pivot Root Methods:
I've been thinking about this method
knoppix root=/dev/hda5 noinitrd ro
using Loadlin.exe. to either boot to a CD or my own HD.
This is how I boot to my HD now and to the original CD if I want.
If I can boot to my own HD installation, why couldn't I also boot to a DVD with my uncompressed partition copied to it?
The same DVD could also have the c:\Knoppix directory copied to the DVD, to be put on the target computer to boot the DVD. The batch file Loadlin runs would be modified if necessary to make everything work on the target computer.
Since I really don't want to remaster CDs to distribute them, and just want to run my own installation on another computer that I have in mind, (which happens to have a DVD player in it) why wouldn't this work?
sakiZ
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$314.99
Cisco C881W-A-K9 Gigabit Ethernet Wireless Security Router
$175.00
Cisco IP Phone 6841 – CP-6841-3PW-NA-K9=
$75.00
Cisco WS-X4712-SFP+E 12-Port 10GbE Line Card SFP+ Module Catalyst 4500E Series
$94.99
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst 3650 24 10/100/1000 Ethernet PoE+4x1G Uplink Port 640WAC LAN Base
$35.00
UNCLAIMED Cisco Meraki MS120-24P-HW - 24Ports Ethernet PoE Switch Same Day Ship
$315.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00