-
Junior Member
registered user
hoi kimmeke,
Originally Posted by
kimmeke
Godot,
(my english is not so good and I thing you are a Dutchman so...)
Het wil maar niet lukken. Na een zoveelste poging (Mandrake crasht altijd, debian wil zelf de diskette niet meer lezen bij inlezen van extra drivers, knoppix wil niet booten van HD) Heb ik de stappen onder uw " Hard disk installation of Knoppix cd, booting from a Knoppix cd " gevolgd.
Na stap 14. "lilo -C /boot/lilo.conf" krijg ik de melding:
Warning: RAID1 install implied by omitted 'boot='
Fatal: Can't put the boot sector on logical partition 0x0100
ik denk dat je best /boot/lilo.conf editeert voor je lilo uitvoert door 'boot=...' te laten verwijzen naar de plaats waar je de bootsector wil laten terecht komen...
De eerste regel op uw website wil ook niet lukken:
knoppix lang=us dma noprompt
dan blijft hij bij het booten hangen achter:
Scanning for Harddisk partition and creating /etc/fstab....
dat kan te maken hebben met de `dma' die gespecifieerd wordt... op de machines waarop ik een en ander heb getest, levert dat een serieuze tijdwinst op bij het copieren van de informatie naar de harde schijf (van 30 minuten naar minder dan 10), maar op sommige machines werkt dat inderdaad niet zo best... welk soort computer gebruik je ?
Verder heb ik opgemerkt dat mijn root device hda5 is. En ik die dacht dat dit hde1 is omdat hier mijn Windows op staat.
het root device is de partitie die als / zal gemount worden... als je daar je windowspartitie voor opgeeft, zal het ding met zekerheid zijn kluts kwijt geraken
geven wat je hieronder stelt, lijkt het me best om je rootpartitie te laten verwijzen naar /dev/hde8. als het commando in stap 10 iets anders oplevert dan /dev/hde8, kan je dat best manueel aanpassen met `export THISROOT=/dev/hde8` en daarna de stappen 11 en volgende uitvoeren zoals op mijn homepagina...
Verder zijn mijn gegevens:
1 S-ATA HD
hde5 -> data (ntfs)
hde6 -> Software (ntfs)
hde8 -> linux
hde7 -> swap
Heb jij enig idee waarom er geen enkele wilt werken?
Knoppix van CD werkt wel, maar dan kan ik geen upate en dergelijke doen.
met vriendelijke groeten, g.
-
Hallo,
Originally Posted by
godot
ik denk dat je best /boot/lilo.conf editeert voor je lilo uitvoert door 'boot=...' te laten verwijzen naar de plaats waar je de bootsector wil laten terecht komen...
in mijn lilo staat nu "boot=/dev/hde8". Moet dit iets anders zijn?
Originally Posted by
Kimmeke
De eerste regel op uw website wil ook niet lukken:
knoppix lang=us dma noprompt
dan blijft hij bij het booten hangen achter:
Scanning for Harddisk partition and creating /etc/fstab....
zonder dma lukt het wel
Originally Posted by
godot
welk soort computer gebruik je ?
MOBO: ASUS A7N8X Delux v2.0
HD: WD SATA 80 Gb
Ik heb ook de howto voor dual boot m.b.v. grub eens gevolgd en dan blijft hij bij het booten ook hangen achter de melding: hde:drive not ready for command.
Volgens mij is er iets mis met SATA (controller?)
Verder zijn mijn gegevens:
1 S-ATA HD
hde5 -> data (ntfs)
hde6 -> Software (ntfs)
hde8 -> linux
hde7 -> swap
-
Godot,
Is de volgende melding OK na stap 11:
Originally Posted by
Op scherm
root@ttyp0[root]# export THISROOT=/dev/hde8
root@ttyp0[root]# genliloconf /dev/hda $THISROOT "" $BOOT/vmlinuz > $LILO
part: /dev/hde1, typ: 7
part: /dev/hde5, typ: 7
part: /dev/hde3, typ: 7
Segmentation fault
[/quote]
-
Junior Member
registered user
Re: making knoppix install to hard disk easier than ever
Originally Posted by
godot
just wanting to share my results after some experiments installing Knoppix on hard disk...
I produced a step-by-step installation procedure for Knoppix on
http://ace.ulyssis.org/godot...
Thanks---you have a lot of useful info there.
May I suggest, though, that you use a more readable color scheme---e.g., dark text on a light, non-patterned background? I know it's not as cool-looking, etc., but most of us are already pretty stressed out just trying to make Linux work, and that would really help.
Cheers, Ander
-
Junior Member
registered user
hoi kimmeke,
dat lijkt me niet echt normaal, neen... met dat type moederbord heb ik een en ander al zonder enig probleem aan de praat gekregen, weliswaar met een andere harde schijf : een 120 gig van maxtor...
ivm je probleem : misschien kan je je biosinstellingen eens herinitialiseren naar de `factory defaults'... als dat niet helpt, weet ik echt niet hoe een en ander op te lossen zou zijn...
om te weten waarop het ding de segmentation fault geeft, kan je `strace genliloconf /dev/hda...` eens uitvoeren...
een laatste suggestie : probeer je rootpartitie eens primair te maken...
cu, g.
-
Junior Member
registered user
Re: making knoppix install to hard disk easier than ever
removing redundant message
-
Junior Member
registered user
Re: making knoppix install to hard disk easier than ever
dear Ander,
the background suggestion has been taken into account... I hope the result has become less frustrating/irritating...
cu, g.
Originally Posted by
Ander
Originally Posted by
godot
just wanting to share my results after some experiments installing Knoppix on hard disk...
I produced a step-by-step installation procedure for Knoppix on
http://godot.studentenweb.org
Thanks---you have a lot of useful info there.
May I suggest, though, that you use a more readable color scheme---e.g., dark text on a light, non-patterned background?
Cheers, Ander
-
hdd install
I have Mandrake installed on a maxtor 10 gig drive. I would like to replace it with Debian. Can I do this with a Knoppix hd install? Will it erase my /home directory? Is there a way to make it a full Debian system, or will I need to try installing Debian again?
-
Junior Member
registered user
Re: hdd install
Originally Posted by
maillion
I have Mandrake installed on a maxtor 10 gig drive. I would like to replace it with Debian. Can I do this with a Knoppix hd install?
sure...
Will it erase my /home directory?
if you want to preserve your /home directory, you should copy it to somewhere else, e.g. to a separate partition... keep in mind that it is good practice to use a separate partition for /home...
Is there a way to make it a full Debian system, or will I need to try installing Debian again?
if you install knoppix, you will have a debian/testing/unstable system which will be fully installed and configured...
cu, g.
-
Senior Member
registered user
Reading this thread, I was interested if the subject that I had issues with was being covered, and it appears, it isn't...
I installed Knoppix 3.2 and 3.3 -=- seperately, but both using the knx-hdinstall process.
I had a document hard copy of the procedure found at http://www.freenet.org.nz/misc/knoppix-install.html
and followed it word for word, and got lost...
I was fine up until the point where it said:
Follow the guided installation menues. This will include:
* creating a Linux partition
* creating a Linux Swap partition
And when thrown into cfdisk - I was LOST...
It wasn't guided, it was chaotic. Considering I was working with a dual-boot system, I was scared of making a scrambled drive, and aborted out.
It would be nice, if the creators of the install process, could have maybe put information on what you need to do, inside cfdisk, on the message box that comes just before cfdisk is fired off. Something like:
The next step, create a Linux partition and Linux Swap - you will need to add a partition of at least xxMeg and make it BOOTABLE as type "Linux" #XX - and a second partition of at least xxMeg and make it type "Linux Swap" #XX. Then, when finished, do a WRITE, and then when it has been sucessfully written to the drive, do a QUIT. You will be returned at that time to continue your installation process.
<OK>
That way, you aren't "thrown" into something blindly, and some of that "fear" doesn't overtake someone. (as it did me)
Just some ideas, I realize we are dealing with a shell (DOS) type screen, and can't have information on the same screen as cfdisk is at that time, but maybe a small "heads up" beforehand, may help new users???
Just a thought,
Cuddles
Similar Threads
-
By lilsirecho in forum Customising & Remastering
Replies: 0
Last Post: 04-09-2005, 03:47 AM
-
By FineWolf in forum MS Windows & New to Linux
Replies: 3
Last Post: 02-16-2005, 03:10 PM
-
By wen in forum Customising & Remastering
Replies: 2
Last Post: 10-12-2004, 12:57 AM
-
By Paul_E in forum The Lounge
Replies: 2
Last Post: 08-07-2003, 09:31 PM
-
By orvil in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 05-14-2003, 03:49 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 4x Nvidia GPU AI Server 3.8Ghz 8-Core 256GB 2x10G SFP+ 2x2200W
$3472.00
Supermicro 4U 4x Nvidia GPU AI Server 3.8Ghz 8-Core 64GB 2x10G SFP+ 2x2200W
$3180.00
Dell XC630 Server 3.00Ghz 8-Core 128GB 2x 800GB SAS SSD 12G 8x NEW 2TB SSD H730P
$2598.15
Supermicro 4U 4x Nvidia GPU AI Server 2.6Ghz 8-Core 256GB 2x10G SFP+ 2x2200W
$1382.00
Dell OptiPlex 7050 Desktop 3.40GHz Intel Core i5-7500 8GB DDR4 RAM NO HDD
$70.00
Intel - Core i7-13700K 13th Gen 16 cores 8 P-cores + 8 E-cores 30M Cache, 3.4...
$489.99
Intel - Core i9-13900K 13th Gen 24 cores 8 P-cores + 16 E-cores 36M Cache, 3 ...
$689.99
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
HP Z820 8-Core 2.60GHz E5-2670 128GB RAM No HDD No OS
$235.90
Dell Precision 3420 SFF Intel Core i5-6500 8GB RAM 256GB SSD WIN 11
$75.00