Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Hi Gurus,
I just installed Knoppix 3.3 on my HDD. It works incredibly well, but I have a problem with the security level. I do use Knoppix to connect on other unix servers (Sun, HP, ...) and develop on those machines. The trouble is that a telnet works ok but I can't run any graphical interface because of DISPLAY not reachable. However, I have defined and exported the DISPLAY as found in 'ifconfig'. I have also enabled external display through 'xhost +'. Finally, I've found in /etc/hosts.allow and /etc/hosts.deny that the config was set up as 'PARANOID'. I've renamed both files (according to the man page, lack of file opens the connection). As long as I do not run a server but a workstation, security is not a major constraint for me. I'm missing a config file somewhere to enable DISPLAY to pass through but where. While testing, I realized that even assigning the IP address to the user knoppix (rather than the hos name) causes the same problem.
Could anyone help on this ?
TIA,
Pierre
Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Good question I didn't ask myself, but I assume it would make no difference in the current situation: graphical apps can't open the display and do abort. You could test it youself:Originally Posted by windos_no_thanks
1) 'ifconfig' to determine your IP address
2) export DISPLAY=IP address:0.0 (192.168.1.10:0.0 for example)
3) 'xclock' returns Error: Can't open display: ...
Any idea?
TIA,
Pierre
You are looking for the setting nolisten tcp in the file /etc/kde3/kdm/Xservers if you are doing this in KDE.Originally Posted by pierrevn
[edit]
You would have to restart kdm for the changes to take effect with /etc/init.d/kdm restart as root this best done from a console login unless you want to lose any unsaved work when KDE re-starts.
[/edit]
Thanks to you, Stephen: I removed this 'nolisten tcp' from the file and it works now as I expect. Great!
Cheers,
Pierre
I see you already got it working but using ssh should have made a difference. Using the -X switch (by default on in knoppix so you usually don't need to specify it) ssh forwards theOriginally Posted by pierrevn
X connections through the encrypted pipe. The application on the remote machine thinks
it is using a display on the same machine, your X-server also thinks the application is on the
same machine as itself and everyone is happy.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Hynix 2x 8GB (16GB) PC4-19200 DDR4-2400MHz 288Pin Desktop Memory Module
$18.99
Samsung 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory M471A2K43CB1-CRC Tested Working
$17.99
Micron 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory MTA16ATF2G64HZ-2G3E1 Tested
$17.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
Samsung 8GB (2x4GB) DDR3 1600MHz PC3 Desktop RAM Memory | M378B5173DB0-CK0 |
$8.30
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96
USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT
$230.40